internal stress发音

意思翻译

[力][机]内应力

相似词语短语

internal───n.内脏；内部特征；adj.内部的；体内的；（机构）内部的；国内的；本身的；内心的；（大学生）本校生的

stress───n.压力；强调；紧张；重要性；重读；vt.强调；使紧张；加压力于；用重音读；n.(Stress)人名；(意)斯特雷斯

internal storage───内存（储器）; 内存储器；[计]内部存储器

internal gear───[机]内齿轮

alternating stress mean stress───交变应力平均应力

shear stress───[力]剪应力；[力]剪切应力；剪应力; 切变应力; 切应力; 粘性摩擦应力

internal control───[审计]内部控制；内控；内部控制，内部管理

internal audit───[审计]内部审计，内部稽核

internal medicine───内科医学，内科；n.内科医学

双语使用场景

To remove internal stress such as those produced by drawing, bending, or welding.───去除内应力，如用冲压、完全或焊接成型的工件。

Yes, willpower can produce short-term change, but it creates constant internal stress because you haven't dealt with the root cause.───的确，意志力可以带来短期的改变，但因为你没有先处理问题的根源，结果反而引起内在持续的压力。

Bearing parts in the process of hardening cooling by internal stress due to the formation of quenching cracks crack said.───轴承零件在淬火冷却过程中因内应力所形成的裂纹称淬火裂纹。

Thus, the products are easy to suffer from short molding, scorching, excessive internal stress other defects.───容易造成制品打不满，烧焦、内应力大等各种缺陷。

The stress variation in the center is just opposite, and a structural type internal stress state is formed after quenching.───心部的应力变化正好相反，最终形成了组织应力型的内应力分布。

That the internal stress is released strongly by heat treatment results in a decrease of the magnetic-field-induced strain.───热处理后，内应力大大降低，导致磁感牛应变降低。

meanwhile, cracking happened at the presence of chemical reagent and residual internal stress due to the low chemical resistance of PC.───同时PC耐化学性能较弱，在化学试剂和内应力的共同作用下最后发生了开裂。

This is a method of reliving the internal stress set up in steel during forming, cold working, and cooling after welding or machining.───这是消除内应力的一种方法，内应力是在钢铁的成形中，冷加工中，焊接或切削后的冷却中产生的。

Destiny has sent us this Man so that we, in this time of great external and internal stress, shall testify to the miracle.───命运给我们带来了这个人，使我们在这内外交困的时刻，将能亲眼看到奇迹……

英语使用场景

Free-standing diamond grain-nickel composite films were deposited by electrotyping method at the condition of low internal stress electrolytic solution, with pH value of 3.

The combined action of the applied and internal stress has brought about the formation of dislocation patterns in the process of plastic deformation.

The profile, internal stress, cold - bending cracks and surface flaws of the hot strip have been analyzed, and the corresponding strategics and resolutions are also preferred, In order to improve the.

It is found that the internal stress of the lining obtained by means of field monitoring is smaller than the strength of the concrete lining.

Applications of silicone adhesive for adhering quartz ceramic and low expansion alloy, and measures for reducing internal stress to obtain high strength and high temperature performance are discussed.

Design of stainless steel air way and high-speed and strong hot air convection, quickly removing internal stress of upper and making it fit.

The internal stress is consisting of circumferential stress and axial stress, from which the compound stress of the weld seam is derived.

The relative internal stress of UV-curing coatings with bases is measured by using diffuse right polariscope WEM-300 based on the principle of photoelastic.

The internal stress of electrodeposit is one of the important factors of affecting electroplatingQuality.