internal friction信息详情
[力]内摩擦；[材]内耗
friction───n.摩擦，[力]摩擦力
internal───n.内脏；内部特征；adj.内部的；体内的；（机构）内部的；国内的；本身的；内心的；（大学生）本校生的
friction factor───[力]摩擦因子；摩擦率；摩擦率，摩擦因数
palp friction───触须摩擦
internal storage───内存（储器）; 内存储器；[计]内部存储器
friction factors───阻力系数；[力]摩擦因子；摩擦率
internal gear───[机]内齿轮
fluid friction───[流]流体摩擦；铃摩擦
internal control───[审计]内部控制；内控；内部控制，内部管理
analogy between internal friction increment and overstress due to strain-rate sensitivity is clarified.───由于应变率敏感性所引起的内耗增量和过应力的类比性。
These findings improve the understanding of the mechanism of GB internal friction.───这些发现加深了对晶界内耗机制的认识。
usual internal friction instrument is low-frequency mechanical relaxation instrument.───通常的内耗仪，应为低频力学弛豫谱仪。
Determination of the yield strength of nuclear reactor pressure vessel steels by means of amplitude-dependent internal friction.───通过随振幅变化而变化的内磨擦测定核反应堆压力容器钢屈服强度…[中国核科技信息与经济研究院]。
The internal friction coefficients is deduced from the law of Maxwell distribution of velocities and distribution of mean-free path.───根据麦克斯韦速率分布和自由程分布推导出内摩擦系数。
All internal friction harmful to the War of Resistance must be sternly checked.───任何不利于抗战的内部磨擦，都必须用严正的态度加以制止。
When the car wreck plowed into each other, - there was internal friction-- - no external friction-- and that took out kinetic energy.───车辆残骸相互撞入，是有内部摩擦的-，但没有外部摩擦-，这是损耗动能的。
Soil resistance and pastes cohesion and internal friction angle, is the two indicators which evaluate the performance of soil shear.───土壤抗剪黏聚力和内摩擦角，是评价土壤抗剪性能的两项指标。
internal friction angle showed the largest evergreen broad-leaved forest, temperate coniferous forest minimal.───内摩擦角表现为常绿阔叶林最大，温性针叶林最小。
The influences of the angle of internal friction, the angle of wall friction to the direction of principal strain rate are analyzed.
Young's modulus and internal friction angle have great effect on base bearing capacity, but cohesive strength have little effect on it.
Internal friction studies reveal that in steels and their decarburized alloys as well as non-ferrous alloys, the early stage effect of the bainitic transformation is the nucleation process of bainite.
In either case the internal friction is found to be proportional to the first and second power of (1-S), where is the degree of long range order.
Two internal friction peaks were found in pure rhombohedral PZT73 ceramics.
The cohesion and angle of internal friction of rock reduce considerably after unloading confining pressure; the reduction is more obvious especially with water pressure.
The analogy between internal friction increment and overstress due to strain-rate sensitivity is clarified.
Cohesion and angle of internal friction decrease along with the broadening of water content and the better linear relation exists in the moistening process.
Internal friction angle has a strong nonlinear relation with moisture state related saturation and a weak nonlinear relation with density state related saturation respectively.