intermediate roll信息详情

intermediate roll发音

意思翻译

中间辊

中间轧辊

相似词语短语

intermediate───v.充当调解人,起媒介作用;adj.中间的,过渡的;中级的,中等的;n.中级生;(化合物)中间体,中间物;中介,媒介

intermediate fasting───中间禁食

intermediate color───过渡色

intermediate good───中间货物

intermediate filaments───[医]中间丝;中间纤丝;中间丝;中间纤维

roll───n.(Roll)(美、挪、加)罗尔(人名);v.滚动;翻身;(眼睛)转动;在原地打滚;(马)仰卧蹬脚;左右摇晃;蹒跚;使翻车;掷(骰子);掷出(骰子数);(转动)肩膀;行驶;推;摇车窗;(液体)滚落;(时间)流逝;稳定持续的;(产品)从(机器)产出;涌流;延绵起伏;运转;卷,卷起;展开;搓成;辗;发出隆隆声;把(衣服的边)卷起来;压平;覆盖;启动;用颤音发出(辅音,尤其是r);n.卷;柱形物;卷状食品;滚动;翻筋斗;左右摇晃;隆隆声;小面包;总人数;名单;公文;延绵起伏;辊轧机;一管;掷骰子

pre intermediate───中间前

intermediate goods───半成品,半制成品;中间产品;半成品

intermediate product───[工经]中间产品;半成品;中间乘积;中间体; 中间产物; 半制品; 半成品

双语使用场景

Special Mill Features: Hydraulic Automatic Gauge Control. Positive and Negative Work Roll Bending. Intermediate Roll Shifting.───轧机特点:液压自动凸度控制工作辊的平衡与正、负弯。中间辊的侧移。

technique of intermediate roll shifting, the HC-mill's gap stiffness and the shape control ability is improved significantly.───中间辊轴向窜动技术,使轧机的横向刚度显著增加,提高了板形控制能力。

design principle and realization of quenching control system based on PLC used in Sendzimir Mill intermediate roll were introduced.───介绍了以可编程控制器(PLC)为核心的森吉米尔轧机中间辊中频淬火控制系统的设计原理与实现过程。

By the technique of intermediate roll shifting, the HC-mill's gap stiffness and the shape control ability is improved significantly.───HC轧机采用中间辊轴向窜动技术,使轧机的横向刚度显著增加,提高了板形控制能力。

In addition, intermediate roll must break away from monlchamus road and waterway system, it is essential to avoid method.───另边,洋间辊务必摆脱不朱路与旱路编制,也是必不成多的制止办法。

Study on forging of intermediate roll made of semi -high -speed steel───锻造半高速钢中间辊的研究

Probing into Abnormal Surface Damage of Intermediate Roll of CVC Could Rolling Mill───CVC六辊冷轧机中间辊异常损伤探讨

Effect of Holding Technology at Intermediate Roll Table in Hot Continuous Rolling on Phase Transformation and Structure of Low Carbon Steel───热连轧中间辊道保温工艺对低碳钢相变和组织的影响

Design and Realization of Sendzimir Mill Intermediate Roll Quenching Control System Based on PLC───森吉米尔轧机中间辊淬火工艺PLC控制系统的设计与实现

英语使用场景

Special Mill Features : Hydraulic Automatic Gauge Control. Positie and Negatie Work Roll Bending. Intermediate Roll Shifting.