saw-toothed信息详情

saw-toothed发音

意思翻译

adj.成锯齿状的,锯齿状的

相似词语短语

toothed───v.装齿;使成锯齿状;咬合(tooth的过去分词);adj.有齿的;锯齿状的;凛冽的

saw───v.看见;明白,了解(see的过去式);v.锯;锯成;用锯;乱剪;拉锯似的来回移动;n.锯;格言

saw in saw───锯中锯

saw a saw───看到一把锯子

toothed wheel───[机]齿轮;齿轮,齿缘轮

gat-toothed───有齿的

saber-toothed───adj.上犬齿的;有军刀形的

toothed whale───[脊椎]齿鲸;n.啮齿类鲸类动物(有气孔)

saw into───把…锯成…

双语使用场景

The stability of saw-toothed thread implants is better than "V" thread.───型螺纹种植体的稳定性比三角型螺纹好。

The angled roofs result in a saw-toothed profile.───倾斜的屋顶形成了锯齿状的建筑轮廓。

He believes "a saw-toothed advance" will characterize a recovery this autumn.───他认为今年秋季的复苏将以“锯齿式前进”为特征。

Notched like the edge of a saw ; saw- toothed ; serrate .───使刻得象锯的边缘的;锯齿的;齿状边的。

Their backs were battleship gray topped with a saw-toothed line of small yellow dorsal fins.───它们的背部是军舰的灰色,最上方是呈锯齿状的黄色背鳍。

C. D. is saw-toothed -- flat, then a sudden spike, followed by a relatively sharp drop, then flat again.───急性强迫症患者发病的曲线图是锯齿型–先是平面,然后骤然升高,接着相对急剧下降,然后再平面。

He believes "a saw-toothed advance" will characterize a recovery this autumn.───他认为今年秋季的复苏将以“锯齿式前进”为特征。

Beyond tower the saw-toothed peaks of the Grandes Jorasses.───远处耸立着大若拉斯山的成锯齿状的山峰。

英语使用场景

The stability of saw-toothed thread implants is better than "V"thread.

A saw-toothed tail and large head distinguish the reclusive Chelydra serpentine(http://Sentencedict.com), or 'snakelike swamp thing.

Beyond tower the saw-toothed peaks of the Grandes Jorasses.

The knife-blade was dull; it cut only because it was chipped in enough places for it to be saw-toothed, jagged.

A digital saw-toothed Wave generator adjustable frequency and amplitude is introduced in the paper, and gives the realizing method as well as actual circuit.

Looking back, Susan saw South Park filled nearly to the brim with cloud, only the saw-toothed peaks rising above it.

Saw-toothed edges? Can't tell. Forthcoming high-resolution pictures will answer this question.

Their backs were battleship gray topped with a saw-toothed line of small yellow dorsal fins.

The change of droppings rate was mainly studied by different working angles of gill pin licker-in and saw-toothed licker-in at different working speeds.