mounting holes发音

意思翻译

安装孔

相似词语短语

mounting───v.安排，组织开展，举办；增加；爬上，攀登；乘，骑（马）；镶嵌，安置（mount的现在分词）；adj.增加的，加剧的；n.支撑物，支座，底托；架设，装备

holes───n.(Holes)人名；(匈)霍莱什；n.小孔；破洞（hole的复数）

mounting pressure───越来越大的压力；日益增长的压力

big holes───大径钻孔

mounting concerns───越来越多的关注

air holes───气孔；河中不冰冻部分

mounting plate───[建]安装板；装配平台；固定台；装配平台; 安装板; 固定台; 上托板

mounting hole───[机][电]安装孔；固定孔；安装孔，固定孔

mounting evidence───n.越来越多的证据

双语使用场景

Fill the dried river fine sand into the foundation screw mounting holes of the diesel engine.───柴油机地脚螺丝安装孔灌上干河沙。

The mounting holes can be made into different shapes according to the shapes of the display products.───述的安装孔也可以根据要展示的物品的形状的不同而做成相应的形状。

Five fine machining junction surface casing, mounting holes are set aside.───五个精机加工连接面箱体，预留安装孔。

The top wall has a pair of key-hole shaped mounting holes (19) therein positioned in an area adjacent the front wall.───所述上壁在其中具有定位在邻近于所述前壁的区域中的一对钥匙孔形安装孔（19）。

Put the dried river fine sand beside the diesel engine, so as to be conveniently filled into the foundation screw mounting holes.───将烘干后的细河沙放在柴油机旁，以便放入地脚螺丝安装孔内。

Consequently, the mounting holes for each type of steering stem differ, so I left them out of the drawing.───因此，在安装型转向每个孔干不同，所以我离开他们出图纸。

In this case the mounting clamps need to be relocated using the four mounting holes on the top of the instrument housing.───在这情况，架设螺丝钳需要被重新装置使用四个架设工具住屋的顶端上的洞。

all dimensional design parameters of mounting holes in slipping shoe can be obtained in one calculation process.───而且一次计算可以得到滑靴安装孔尺寸设计的所有数据。

the connecting plate is a right-angle triangle and mounting holes are respectively arranged on the three angles of the right-angle triangle.───所述的连接板为直角三角板，在直角三角板的三角上各设置有一安装孔。

英语使用场景

The block head design with integrated mounting holes eliminates costly mounting plates and adapters, making the product easier to use and install.

To mount the 830 series stages, you will need to translate the top of the stage so that the 1/2 diameter access hole lines up one of the three mounting holes in the base.

Assemble into a triad body or diad body through linked bracket which has mounting holes for fixing.

Hopefully, a workaround can be found using perhaps a contact adhesive to secure the grommets in the grille frame mounting holes.

Engage the heater-A/C wire harness connector and blower motor relay wire harness connector push-in retainers with their mounting holes in the heater-A/C housing.