longitudinal strain发音

意思翻译

线向应变

相似词语短语

longitudinal───adj.长度的，纵向的；经线的

strain───n.(Strain)人名；(英)斯特兰；n.张力；拉紧；负担；扭伤；血缘；vi.拉紧；尽力；n.（植物、动物的）品种；种类；vt.拉紧；滥用；滤去；竭力

longitudinal study───纵向研究; 纵贯研究

hag strain───和应变

fearful strain───可怕的紧张

groin strain───腹股沟拉伤

longitudinal approach───纵向进近

longitudinal survey───纵向调查；贯时性调查研究；纵向面调查

andromeda strain───安德罗美达菌株（书名）

双语使用场景

relative longitudinal strain between the strip edge and strip center is very small in the whole deformed zone, which can prevent appearing crinkling and bloating.───在整个变形区内板带边缘和中心的纵向相对应变较小，可以防止边缘出现起皱、鼓包。

From 0 load till about 0.8 times the ultimate load bearing capacity, the steel tube longitudinal strain distribution along the depth of cross-section obeys the plain section assumption.───从加载之初直到大约0.8倍的极限承载力，试件纵向应变沿截面高度的分布基本符合平截面假定。

the results, during of the axisymmetry deformation, longitudinal anisotropy and transversal isotropy of polycrystal were obvious with the effective strain increasing.───结果表明，在轴对称变形过程中，随着等效应变的增加，多晶织构显现出明显的横观各向同性及纵向各向异性。

The vibration of 3rd order and 11th order working roll has a large longitudinal strain, which affects the rolling thickness;───工作辊的第3阶和第11阶振型纵向变形较大，造成较大辊缝，对轧制厚度影响最大；

英语使用场景

Base on experiment results, the bernoulli's assumption is taken for the longitudinal strain distribution in shallow section shear wall structures (SSSW).

The results indicate that in venae impotence it might be useful to reduce the longitudinal strain of the tunica albuginea by making the longitudinal fibers...

When the longitudinal strain is much less than the coronary, the restriction to the emissary veins becomes stronger.

From 0 load till about 0.8 times the ultimate load bearing capacity, the steel tube longitudinal strain distribution along the depth of cross-section obeys the plain section assumption.

The results indicate that in venae impotence it might be useful to reduce the longitudinal strain of the tunica albuginea by making the longitudinal fibers stronger.

The relative longitudinal strain between the strip edge and strip center is very small in the whole deformed zone, which can prevent appearing crinkling and bloating.

The largest strain elongation direction pattern corresponds to the description of folds with combined tangential longitudinal strain and layer parallel shear.

A new method is proposed to determine the excited torque and bearing load of the injection pump camshaft by means of measuring the longitudinal strain in the bottom part of the plunger.