motor current信息详情
电动机电流
电机电流
motor───vi.乘汽车；n.发动机，马达；汽车；adj.汽车的；机动的；vt.以汽车载运
current───adj.现在的；流通的，通用的；最近的；草写的；n.（水，气，电）流；趋势；涌流；n.（Current）（英）柯伦特（人名）
motor error───电机故障
rocket motor───[航]火箭发动机
motor bike───n.摩托车
electric motor───[电]电动机；电动机; 电滚子
actuator motor───驱动电动机，执行电动机；伺服电动机
gear motor───齿轮电动机，齿轮马达
cogging motor───齿槽电机
This paper describes the control of the motor current, velocity and position.───本文介绍了电机的电流、速度和位置控制。
The compensation method can effectively improve motor current waveform, the inverter's output performance can be greatly enhanced.───该补偿方法能有效改善电机导流波形，提高了逆变器的输出性能。
The varying characteristics of motor current in vari-speed cutting are discussed in this paper.───本文就变速切削过程中电机电流的变化特征进行了较为系统的研究。
By means of parameter testing of motor current and moment, the design and choices of experiment components are accomplished.───完成了实验系统元件的设计和计算选型，通过对电机的电流、转矩等性能参数的测试。
This product paves the way for a smaller, lighter, easier to produce, high noise rejection, low cost solution to motor current sensing.───此产品铺平了道路，为更小，更轻，更容易生产，高噪声抑制，低成本解决方案，以电机电流感应。
Fuzzy PID motor current controller is designed to make sure the good tracking character of its output current.───设计了模糊PID电机电流控制器使得电机的输出电流有很好的跟踪特性；
motor can be unrestricted up, stop. Won't cause temperature rise up, motor current increases.───电机可无限制地起、停。不会造成电机温升增高，电流增大。
Parametric variation of induction motor for electric vehicles will result in fluctuation of motor current and torque.───电动车辆的变参数感应电动机将导致在电机电流和扭矩的波动。
The effects of vari-speed milling on vibration suppression along with the fluctuation of motor current are discussed in this paper.───通过试验考证了变速铣削的减振效果和机床电机电流的波动幅度。
In a drive system of power transistor inverter-motor, not only can it be used in fine control of motor current waveform, phase, amplitude and frequency, but can also be used to sense, fault current.
The results show that motor current can be used to on-line monitor tool condition when turning.
For the oscillator of caster, the change in motor current can inflect the change in friction between billet and mould under a certain condition.