inlet pressure信息详情
[流]入口压力;[动力]进气压力
inlet───v.引进;嵌入;插入;;n.入口,进口;插入物;水湾
inlet elbow───进口弯头
pressure───vt.迫使;密封;使……增压;n.压力;压迫,[物]压强
inlet grove───入口槽
water inlet───进水口; 进水管;[建]进水口,吸水口
inlet definition───入口定义
inlet wildwood───入口原木
inlet valve───进气阀; 进给阀; 吸油阀; 吸入阀;[机]进气阀;[机]进给阀
bogue inlet───[地名] [美国] 博格湾
inlet pressure, the absolute pressure or gauge pressure shall be indicated.───进口压力还要注明是绝对压力还是表压力。
control options include inlet pressure control, discharge pressure control and flow rate control.───控制方式包括进站压力控制、出站压力控制和流量控制。
High inlet pressure can be caused by too high gas flow.───高气压力可能造成的过高的气体流量。
There is an approximate linear relationship among the column inlet pressure, the retention time of solvent, and the half peak width.───理论和实验均表明:溶质的保留时间,流出峰半峰宽与柱前压倒数近似呈线性关系;
Aerodynamic design method and numerical simulation are used to optimize the profile of the ram air inlet for enhancing the inlet pressure.───通过优化气动外形及数值模拟对进气道流道型面进行优化设计,以尽可能扩大系统进压力;
Inlet pressure losses developed during relief conditions must be taken into account when sizing the pressure and vacuum relief devices.───在对压力和真空泄放装置选型时,在泄放情况下的进口压力损失的变动必须要进行计算。
This does not pose a problem, however, with pipelines and liquefied gas products where inlet pressure is maintained relatively constant.───但是,对于入口压力相对恒定的管道和液化气体产品而言,这不是一个问题。
The research result shows that the outlet pressure rises rapidly when the frequent of the inlet pressure rises to a high value.───研究结果表明:当气体的入口压力波频率上升到一定值时,出口压力将急剧上升。
A booster pump, used to increase the sterilization machine into this machine inlet pressure.───一台增压泵,用于增加杀菌机进入本机的进口压力。
By applying black box theory inlet pressure, inlet subcooling, outlet pressure and valve opening are selected as influence factors to flow coefficient of electronic expansion valve (EEV).
The inlet pressure is inversely proportional to the size of grain.
Measure the cooling air side static inlet pressure (P) in inches of water at the heat exchanger inlet on the pressure indicator. Refer to Table C.
The effect of operating parameters, such as inlet pressure, temperature and time on cavitation indicate that optimum operating conditions exist at the cavitation enhancive effect is maximum.
Also, it is found and analysed that there exists inlet pressure fluctuation of coiled capillary tubes when the degree of subcooling is changed from one to another.
Regarding the inlet pressure, the absolute pressure ( )or gauge pressure ( )shall be indicated.
The optimum parameters, such as electron current and voltage for ionization, acceleration voltage, retarding voltage, gas inlet pressure, were determined by experiments.
Effect gas inlet pressure, geometrical de - sign and relative position of metal delivery tube, atomization gas, etc.
The relationships of the self-sealing pressure of two types of direct acting gas regulators to its structural characteristics and inlet pressure are analyzed.
- mechanical denudation
- my pain
- minced beef recipe
- morning beauty routine
- morning bells
- high season
- i say hey
- mechanical department
- i say hello to my friends
- i say hello you say goodbye
- lucky hous
- jogger boost
- light liu
- laurent ferrier
- maltoses
- maltosex
- minced chicken
- next he
- mechanical deposit
- my pain is immeasurable and my day is ruined
- kilolitres