measuring point发音

意思翻译

测点；[测]测量点

相似词语短语

measuring───adj.测量用的；n.测量；衡量；v.测量（measure的ing形式）

measuring instrument───[测]测量仪表；测量仪表，测量仪器

measuring cup───n.[计量]量杯；n.量杯

measuring range───[测]测量范围，[仪]量程；测定范围，测量范围，量程

measuring jug───〔烹饪时用的〕量壶,量杯

measuring sticks───测量棒

measuring device───[测]测量仪器，量测工具；测量仪表；测量仪器，量具

measuring tape───[计量]卷尺；皮尺；卷尺，皮尺; 测尺

measuring equipment───[测]测量设备；量具；测量设备[装置]

双语使用场景

input of the network group is a data set of a period of time from a temperature measuring point.───网络组的输入是定子测温系统提供的每一个测点的一段时间的温度变化过程的数据集。

This topic designed one kind to have many measuring point intelligence temperature survey control application systems.───本课题设计了一种具有多个测点的智能温度测量控制应用系统。

The key of oxygen activation logging interpretation was water-flow velocity which determined every measuring point.───氧活化测井解释的关键是确定各测点的水流速度。

This paper deseribes a theoretical design of a new magnetic sensor for measuring point values of magnetic induction of stimulating fields.───提出了一种用于磁刺激场测量的新型点磁场测量传感器的理论设计。

If the measuring point is embedded after excavation of core soil, the lost settlement will be approximately 37. 5% of the total.───核心土开挖后布设测点造成的总损失量约占累计沉降值的37.5%；

The high precision and reliability of the reconstruction model are reached by increasing sample density of measuring point cloud.───通过增加点云的采样密度，提高重建模型的精度和可靠性。

Variations in face velocity for the fume hood shall not exceed 10% of the average face velocity at any designated measuring point.───通风柜表面风速的偏差不能超过设定风速的10%。

The ground noise of the measuring point decreased with increasing distance from the elevated highways.───噪声随着与高架路距离的增大，地面各测点的噪声值呈递减趋势；

Tensile test on separately cast sample . Hardness test on component . Hardness measuring point defined in drawing.───必须单独做各个取样的拉伸试验，组件硬度试验。在图纸上必须标明其硬度测试点。

英语使用场景

Conclusion The new measuring point and indexes can digitally describe the malar bone structure and its relationship with other facial bony structure.

The ground noise of the measuring point decreased with increasing distance from the elevated highways.

Detailed measuring point layout schemes and test methods for the different parts directly contacting with combustion gas are introduced and tests on diesel engine CA6DF1-27are done.

According to the intake duct character of diminutive gaso line engine, a new method-turnover form method is presented, and the precision of measuring point cloud by this method is high.

It is composed of a sequence of measuring point, anchor point and approach direction.