initial temperature发音

意思翻译

[热]初始温度

相似词语短语

initial───n.词首大写字母；原始细胞；adj.最初的；字首的；vt.用姓名的首字母签名

temperature───n.温度；体温；气温；发烧

critical temperature───[物][电子]临界温度；n.临界温度

Initial Rings───初始环

initial beauty───最初的美丽

temperature outside───室外温度

full initial───全名首字母

temperature rise───[电]温升；温度上升；温度上升，温升，升温

shared initial───共享首字母

双语使用场景

So I'll start at some initial temperature, T1.───那么我从某个初始温度T1开始。

initial temperature of solid heat carrier has great influence on the gas composition.───热载体初始温度对热解气组成影响显著。

Initial temperature of catalyst bed is wholly too high.───提高起始反应温度使催化剂床层温度整体过高导致飞温。

controlling cooling rate can be realized by controlling the initial temperature, bellows-strip spacing and jet rate of the cooling gas.───控制冷却速度可以通过控制带钢初始温度、带钢与风箱间距和冷却气体喷出速度等参数来实现。

The results indicated that the absorbent cotton and bamboo had a lower initial temperature than polypropylene when pyrolyzed .───与纤维素类的脱脂棉和竹子相比，聚丙烯的分解反应起始温度明显较高。

Thus, the errors of the estimated initial temperature of the system could cause a big error for the modeling results.───初始温度估计的偏差会使模拟结果产生很大的变化；

The entanglement achieved by fields heavily depends on their initial temperature and the detuning.───这个通过热场获得的纠缠深深的依赖于初始热场的温度和失谐。

One way is increasing the combustion initial temperature, and the other is reducing the gas turbine inlet air temperature.───提高燃气轮机的出力和热效率有两种方法，一种方法是提高燃烧初温，另一种方法是降低燃机进气温度。

Meanwhile, the methods of getting the initial temperature and the fitness function are discussed.───对初始温度的确定方法和获得适应度函数的方法进行了探讨；

英语使用场景

Then the authors analyse the effect of initial temperature and cooling rate on thermal stress and the low temperature cracking performance of different asphalt cement.

Through inspection of MSDB process, it can be found that initial temperature of solder droplet is the main influential factors for reliable bump.

The results indicated that the absorbent cotton and bamboo had a lower initial temperature than polypropylene when pyrolyzed .

The pulverized coal-air flow ignition limit is mainly influenced by such parameters as initial temperature, ignition source temperature, coal rank and the fineness of the pulverized coal.

There exists a lowest temperature, reliable MSDB bump can be achieved only when initial temperature of solder droplet is above this temperature.

Influence of the initial temperature fields and mold hardness on the shrinkage defect of ductile iron casting by EPC process was mainly investigated in this paper.