load stress发音

意思翻译

[力]荷载应力

相似词语短语

stress───n.压力；强调；紧张；重要性；重读；vt.强调；使紧张；加压力于；用重音读；n.(Stress)人名；(意)斯特雷斯

load───vi.[力]加载；装载；装货；vt.使担负；装填；n.负载，负荷；工作量；装载量

alternating stress mean stress───交变应力平均应力

shear stress───[力]剪应力；[力]剪切应力；剪应力; 切变应力; 切应力; 粘性摩擦应力

financial stress───资金紧张；财务压力

residual stress───[力]剩余应力；残余应力

M stress───M应力

proof stress───[力]弹性极限应力；试验应力；耐力；弹性极限应力，耐力，试验应力; 屈服点

ease stress───缓解压力

双语使用场景

By setting up finite element model, the load stress and the warping stress of the two materials pavement are calculated and compared.───建立有限元模型，计算配置两种材料道面的荷载应力与翘曲应力并进行比较。

Thermal stress calculation of no-crack concrete frame structuresThermal stress was compared with load stress and characteristic of thermal stress was analysized.───出现裂缝的混凝土框架结构温度应力计算将温度应力与荷载产生应力进行对比，分析温度应力的特点。

effect of environment conditions, load stress, pollution, temperature variation on shattering rate is discussed.───分析讨论了自然条件、荷载、严重污秽、气温变化等环境条件对产品自破率的影响。

during the propagation of the reflection crack, load stress is the main factor that causes the propagation.───在裂缝发展过程中，轴载是引起反射裂缝发展的主要因素。

The influencing modulus picture of load stress from asphalt layer is acquired.───研究得到了沥青加铺层对荷载应力的影响系数图。

It has the load bearing stably, the supporting load stress simple, the stress is lower and so on the merit, which has the higher use value.───其具有承载稳定、支承载荷受力简单、应力较低等优点，具有较高的使用价值。

The surface mounting sensors have the advantage of being replaced, but they can not solve the issue of monitoring dead load stress.───表贴传感器具有可更换的优点，但不能解决恒载应力监测问题。

A type of work item that records a constraint on the system such as performance, load, stress, security mechanism, or platform.───一种工作项类型，它记录对系统的约束，如性能、负载、压力、安全机制或平台。

英语使用场景

The experimental results indicated that with the increase of load, the load displacement, load stress curves of point supported mid hollow and laminated glass approached to be linear.

Thermal stress calculation of no-crack concrete frame structuresThermal stress was compared with load stress and characteristic of thermal stress was analysized.

Under the same bending load, stress distribution is different from that under pure bending.

A range of tests, including full unit and systems testing, user acceptance testing, and load/stress testing, take place at the customer site.