hot side发音

意思翻译

热侧

高电位侧

相似词语短语

side to side───从一边到另一边；边对边

side in side───并排

side───n.(Side)人名；(英)赛德；vt.同意，支持；n.方面；侧面；旁边；adj.旁的，侧的；vi.支持；赞助；偏袒

hot hot───火辣辣的

side my side───站在我这边

hot───vi.变热；n.（Hot）（塞）霍特（人名）；（法）奥特（人名）；adv.热；紧迫地；adj.热的；辣的；热情的；激动的；紧迫的；vt.增加；给......加温

side by side───并肩；一起；并排；肩并肩地，一起; 相互支持; 并排

side and side───一边又一边

gospels side-by-side───福音书并排

双语使用场景

Adopt laser trigonometry displacement measure theory in the detection of glass thickness on line and the method in the hot side of annealing kiln.───玻璃生产线玻璃带厚度在线检测技术采用了激光三角法位移测量原理，在退火窑热端进行玻璃带测厚的方案。

The heat transferring from the hot side to the cold side is the main cause of energy losses.───热能从暖的一面流向冷的一面，构成能量损失的主要因素。

Flip the plank over and put the salmon on skin side down on the hot side of the plank.───翻转板，把皮肤上侧倒在偏热的木板的鲑鱼。

This application covers the case where the hot side is pure steam, condensing isothermally.───这主要应用在热端是纯蒸汽，冷却是等温线降温时使用。

Hot side of the south.───站在酷热难耐的南方。

fluid on a hot side of the heat exchanger contacts a heat exchange surface;───且换热器的热侧流体与换热面接触；

the fluxes increased sharply as the temperature differences between hot side and cool side increased;───随冷热侧温差的增加，膜渗透通量急剧增大；

Design and Application of the Hot Side-riser for Aluminium Bronze Piston Casting───铝青铜活塞类铸件热侧冒口工艺的设计与应用

the pressure drop in the whorl tube (hot side) is the largest, then the ripple tube and the third the light tube;───螺纹管的管内（热侧）压降最大，其次是波纹管，最小是光管；

英语使用场景

A thermoelectric refrigerator with a water - cooled hot side was designed and constructed.

The instantaneous temperature characteristic of thermoelectric cooler cool side and hot side is very important for accurate temperature control.

Flip the plank over and put the salmon on skin side down on the hot side of the plank.

Experimental results show that this method increases the temperature reduction in the hot side of the radiator.

Some studies showed that: if the hot side of the firebrick has a stable coating, it can effectively increase the life span of the firebrick .

Adopt laser trigonometry displacement measure theory in the detection of glass thickness on line and the method in the hot side of annealing kiln.