head pressure信息详情
压头；水头压力
pressure───vt.迫使；密封；使……增压；n.压力；压迫，[物]压强
hydraulic pressure───液压；水压；n.水压; 液压
pressure from───来自于……的压力
ambient pressure───环境压力，周围压力；[流]环境压力；周围压力
head head───头颅
head───n.头；头痛；上端；领袖，首领；最前的部分；理解力；vi.出发；成头状物；船驶往；adj.头的；主要的；在顶端的；n.（Head）（英）黑德（人名）；vt.前进；用头顶；作为……的首领；站在…的前头；给……加标题
peer pressure───同伴压力；来自同辈的压力；同辈压力; 同侪压力; 同龄人压力
external pressure───外部压力，外压，外压力
hydrostatic pressure───流体静压（力）；[流]液体静压力
To provide accurate reading of head pressure , the line should connect at the base of the water column.───为了提供精确的水头压力参数，管线应该连接到水柱的底部。
Set head pressure, split flow, and septum purge flow to appropriate levels.───设置相应的柱头压、 分流比、 隔垫吹扫。
This is referred to as head pressure.───这被称为排出压力。
The head pressure increases when the melt viscosity and temperature decreases, so the products will have good shape and favorable stability.───温度降低时，熔体黏度大，机头压力增加，挤出制品压的较密实，形状稳定性好。
attention to the distinction between centrifugal pump head (pressure head) and Jan height or two different concepts.───注意区分离心泵的扬程（压头）和升扬高度两个不同的概念。
flowing tubing head pressure return routes match the tube whethercorrect, the pipeline neat is whether artistic.───油压回路配管是否正确，管路是否整齐美观。
To two coke oven plant, all kinds of causes to affect the gas head pressure of coke oven were analyzed detailed.───以某焦化厂两组焦炉为对象，研究集气管压力的控制问题，对影响集气管压力的各种因素进行了较为详细的分析。
For high well head pressure, the operation of conventional adding sand fracture treatment tech can not fulfilled.───由于施工井口压力高，常规加砂压裂工艺无法实施作业。
At given speed, delivers constant head Pressure is determined by Impeller Diameter, Impeller Blade Angle, Number of Stages, Operating Speed───出口压力的大小有叶轮直径，叶片角度，叶轮级数，工作转速决定
The loss of drilling fluid to a formation, usually caused when the hydrostatic head pressure of the column of drilling fluid exceeds the formation pressure.
Analysis result of high productivity gas wells in Luojiazhai shows temperature effect of well bore as the key factor affecting well head pressure.
The combine has provided the flowing tubing head pressure punch press, the automatic welding machine, the instrumentation automatically makes the equipment with other.
When the squeeze heads compress the bearing, the position of the squeeze heads can be automatically adjusted to guarantee each squeeze head pressure is equal.