hot cracking信息详情
热裂纹
cracking───n.裂纹，裂缝；爆裂声，噼啪声；分馏；v.破裂；发爆裂声；打开；重击；变声（crack的现在分词）；adv.非常，极其；adj.出色的，极好的；快而令人兴奋的
knuckle cracking───[医]指节断裂；折手指
cracking qq───破解qq
cracking forums───破解论坛
cracking sound───噼里啪啦；开裂声
cracking down───v.镇压；打击；处罚；制裁
cracking bones───裂骨
cracking knuckles───关节断裂
cracking kid───快活小子
Increase external restraint will reduce to some degree the effect of preventing hot cracking by trailing intense cooling.───加大外部拘束会在一定程度上削弱随焊激冷防止热裂纹的效果。
The results showed that TCS steel had good cold cracking resistance and crystal hot cracking resistance.───结果表明，TCS钢具有良好的抗冷裂敏感性和抗结晶热裂敏感性能。
The different microstructure caused higher welding hot cracking susceptibility of a alloy.───两种合金焊缝组织的差异造成A合金有更高的焊接热裂纹敏感性。
at the end of the alloys solidification, a "shock shrinkage" occurs, which leads to the hot cracking.───在合金凝固后期，存在一“冲击”收缩，是“冲击”收缩导致了合金凝固过程热裂的产生。
Hot cracking in aluminum alloys is primarily due to the chemistry of the alloy and the weld bead.───铝合金的热裂最初是由于合金和焊缝的化学作用。
A new method to test hot cracking in metallic alloys was proposed.───设计了一种新的合金热裂行为测试系统。
The Influence of Electromagnetic Vibration on Hot Cracking Initiation of Aluminum Alloy Produced by Continuous Casting───电磁振荡对铝合金连铸过程中热裂纹生成的影响
Strain field analysis of weld with trailing impact rolling to control residual stress and distortion and prevent hot cracking───随焊冲击碾压减小应力变形防止热裂纹应变场分析
Mechanism of weld with trailing impact rolling to control residual stresses deformation and hot cracking───随焊冲击碾压控制焊接应力变形防止热裂纹机理
The creature oil is a fuel of environmental protection, it is produced with straw material, using the crafts of the hot cracking and liquefying etc.
Hot cracking in aluminum alloys is primarily due to the chemistry of the alloy and the weld bead.
The reasons of hot cracking susceptibility are analyzed through electronic-scanning, electronic-probing and energyspectrometric methods on the patterns of fracture surface of hot crack and base metal.
Alloys that are extremely susceptible to hot cracking are not considered appropriate for structural (load-carrying) applications, and are generally put in the non- weldable category.
The authors believe that water accumulated on the surface of adhesion bridge neck from the sand-resin surface and atmosphere is a very factor to hot cracking tendency of resin coated sand.
The results showed that TCS steel had good cold cracking resistance and crystal hot cracking resistance.