head gasket信息详情
汽缸垫；汽缸盖密封垫片
blown head gasket───吹头垫片
anisotropic head gasket───各向异性密封垫
gasket───n.[机]垫圈；[机]衬垫；束帆索
apollonian gasket───阿波罗垫圈
sealing gasket───密封垫片；密封衬片
gasket paper───垫圈纸，垫片纸；衬纸
top gasket───顶部垫圈
coupling gasket───联轴器垫片
gasket scraper───垫片刮刀
The results expatiated that the strength of such cylinder head gasket meet the need when being used.───结果表明，此气缸垫的强度满足使用要求。
gasket fails due to design flaws, rather then fragility.───垫片坏掉是由于设计上的缺陷，而不是本身的工艺问题。
Although people seem to think there is an inherent weakness in the Head gasket in fact that's not true.───虽然人们似乎认为缸盖垫片存在着固有的弱点，但其实并不是这样。
The flame barrier, which locates into a groove in the cylinder head, reduces the stresses on the cylinder head gasket.───火焰屏障，这将在位于气缸盖沟，减少了对气缸盖垫片的压力。
If there's a creamy consistency, similar to mayonnaise, then that engine basically has a blown head gasket and is no good.───如果是油脂样的，就像蛋黄酱，那发动机的盖垫密片已经坏了。
The Head gasket fails due to design flaws, rather then fragility.───垫片坏掉是由于设计上的缺陷，而不是本身的工艺问题。
if the exhaust pipe , cylinder head gasket turbocharger Department have loose or missing gas phenomena, but also should be ruled out.───如果排气管、气缸盖垫片处增压器有松动或漏气现象，也应及时排除。
Cylinder Head Gasket Ablation Causes and Prevention of Engines Used by Buses───车用发动机气缸衬垫烧蚀故障的原因与预防
Troubleshooting of Burned Cylinder Head Gasket───气缸垫烧蚀故障检排
Rubber O-ring, Gasket, Rubber Bonding Parts For Car. Cylinder Head Gasket For Truck Engine.
An engine cylinder head gasket leaking between a cylinder and an adjacent water jacket is indicated by coolant foaming or overheating and loss of coolant.
The cylinder head gasket is made of solid steel.
Are products are: water polo foot O ring gasket seals sucker Washers silicone chip nail head gasket sets of plastic earplugs dust jacket sets of rings, such as sealing ring.
"Golden" Eagle head gasket is an OEM and processing units to accommodate the larger diameter cylinder hole on a larger scale.
The flame barrier, which locates into a groove in the cylinder head, reduces the stresses on the cylinder head gasket.
This is achieved by using cylinder head gasket.
The results expatiated that the strength of such cylinder head gasket meet the need when being used.