blow hole发音

意思翻译

气孔，气眼；铸件气孔

相似词语短语

blow───v.（风）吹；吹奏；喘气；吹气；喘息；擤（鼻子）；熔化，烧断；炸开；泄露；突然离开；浪费（钱、机会）；（古）开花；（苍蝇）产卵于；（鲸鱼）喷水；把……搞糟；鸣（汽车喇叭）；吹制（玻璃）；把蛋黄和蛋清从蛋壳中吹出；n.吹；打击，猛击；挫折；强风；擤鼻子；（非正式）爵士乐演奏；（非正式）大麻；（炼钢用语）吹炼；（古）开花，开花期；int.哎呀（表示厌烦）

blow by blow───针锋相对；一拳一拳的；极详细地（报道、描述）

hole───vt.凿洞；vi.凿洞，穿孔；（高尔夫球等）进洞；n.(Hole)人名；(瑞典、挪)霍勒；(英)霍尔；n.洞，孔；洞穴，穴；突破口

blow one───吹一声

blow away───吹走；驱散；留下深刻印象；（使）吹掉; 吹去; 给…留下深刻印象; 深深打动

blow back───吹回; 漏气；倒吹气；爆炸

by-blow───私生子

drilling hole───钻孔

through hole───透眼，透孔，通孔

双语使用场景

high ambient temperature and damp weather has harmful influence on the cupola melting that causes increase of blow hole defect.───高温潮湿天气对冲天炉熔炼带来不利影响，导致铸件气孔缺陷增加。

The test of water simulation on the original running system verifies shows that unreasonable original running system causes blow hole in 495A diesel engine block casting.───通过对缸体原浇注工艺的水力模拟，发现原浇注工艺不合理是造成495A缸体产生缺陷的主要原因。

main features of the fissure type nitrogen blow hole and its formation mechanism was described.───叙述灰铸铁件裂隙状氮气孔的主要特征、形成机理。

The surface blow hole defect in continuous casting slab and hot rolled plate can be eliminated by utilizing no argon blowing.───采用不吹氩气的生产工艺可以消除连铸坯和热轧板表面气孔缺陷。

She uses her mouth to blow the water to make a current, then her blow hole to break the current into a ring shape.───她会用嘴吹出一个气泡，然后用喷气孔将气泡吹成圆环。

Lip tremolo is driven Xun body with both hands, so quick throttle back and forth with the blow hole produced a special sound wave.───唇震音是用双手带动埙体，使风门与吹孔快速前后移动而产生的一种特殊的波动音。

Proper pouring process would avoid molten iron to be contaminated and reduce blow-hole defect.───正确的浇注工艺能防止铁液受到污染，减少铸件产生的气孔。

The high ambient temperature and damp weather has harmful influence on the cupola melting that causes increase of blow hole defect.───梅雨季节高温潮湿天气对冲天炉熔炼带来不利影响，导致铸件气孔缺陷增加。

Reason Causing Blow Hole of Brake Drum Casting in Plum Rains Season and Its Prevention───梅雨季节制动鼓气孔的产生及预防措施

英语使用场景

Synopsis: This paper introduces the position and characteristics of the blow hole shrinkage in the side riser of cast steel castings and probes into the formation mechanism and its prevention.

Method used to reduce blow hole defects of die castings include 4 aspects:melting, pattern die. parameters of die casting process, and stripping agent.

The whale headed for the other side of the pool with a spurt of his blow hole.