metallographic信息详情
adj.金相学的，金相的
metallographist───n.金相学家
metallograph───n.显微照相；金相显微镜；金相照片
metallographer───n.金相学家
metallography───n.[材]金相学
allographic───异体
meteorographic───气象计的
metallographically───金相
crystallographic───adj.结晶的
calligraphic───adj.书法的；缮写的
structure consists of acicular ferrite and martensite.───组织主要由针状铁素体和马氏体两相组成。
The extracting features of metallography is the key to metallographic analysis.───金相图象特征信息提取是进行金相分析的关键。
The metallographic sample preparation of the stainless steel for surgical implants is studied.───对外科植入物不锈钢试样的制备进行了试验。
The fracture reason of high temperature fixture was analyzed by means of metallographic examination, SEM and chemical composition analysis.───采用金相检验、扫描电镜观察和化学成分分析等方法对万能材料试验机高温卡具断裂原因进行分析。
The surface cracks on steel sheet DB685 was analyzed by metallographic microscope and scanning electron microscope.───用金相显微镜和扫描电镜分析方法，对DB685钢板表面裂纹进行分析。
The heat treating of the cold precision forging gear is researched by experimental and metallographic analysis method.───采用试验和金相分析方法对冷精锻直齿圆柱齿轮的锻后热处理情况进行了研究。
By means of metallographic, energy spectrum analysis, and hardness tests, the fracture reason of the die was studied.───采用能谱分析、金相检验和硬度测试等方法，对模具的断裂原因进行了分析。
Causes of surface black spot and cracks of sponge clamp were analyzed by means of appearance and metallographic observation.───采用宏观和微观组织观察，分析了海绵钳表面黑斑及开裂的原因。
The mechanisms were analyzed and discussed by metallographic observation and transmission microscope observation of the microstructure.───结合金相组织和透射电镜组织观察，对影响机理进行了分析和讨论。
The heat-affected zone and the metallographic structure are studied.
The metallographic and crystal orientation marten-site phase transition was analysed. It was feasible to use the relation matrix between new phase and old phase on orientation analysis.
Metallographic observation, fracture scanning and dispersion spectrum analysis on the fractured turbine blade were carried out.
Use the SEM observe the metallographic, Use the Micro sclerometer measure the hardness of the coating.
It is more than one year that metallographic test being replaced by ultrasonic wave measurement is proved feasible and reliable in practical detection vermicular graphite rate.
Metallographic examination of borided 45 steel sample was made by transmission electron microscopy.
Using metallographic method, the wear of the coupling copper slide block of hot strip mill qualitatively studied.
The metallographic organizations of the original blank, the cup-shaped blank and the inner gear spun workpiece have been analyzed and compared mutually.
Followly, the comparative analysis of the microhardness, metallographic structure and corrosion resistance of laser lap welding welds and resistance spot welding welds were conducted.