hydrogen content信息详情
[化学]氢含量
hydrogen───n.[化学]氢
content───adj.满意的；n.（Content）（法）孔唐（人名）；vt.使满意；n.内容，目录；满足；容量
qes content───目录
hydrogen chloride───[无化]氯化氢
hydrogen ion───氢离子
engaging content───引人入胜的内容
content note───内容注释
hydrogen bond───[物化]氢键
sulphuretted hydrogen───[化学]硫化氢
prediction correlation of residues hydrogen content was given in the absence of elemental analysis.───并给出了在缺乏元素分析的条件下，渣油氢含量的预测式。
Commercial application results showed that the stripping efficiency of the unit enhanced greatly and the hydrogen content in coke decreased down to 6%.───工业应用结果表明，由于催化裂化装置汽提效率的大幅度提高，焦炭氢含量下降到6 %。
The reason for not high hydrogen content and free porosity in welds with this process is explained.───解释了水蒸气保护焊焊缝的氢质量分数不高，不出现气孔的原因。
The hydrogen content has little change in a dry environment. Hydrogen in plated uranium has a tendency of diffusion to the outside.───在低湿储存环境中，镀样中的氢有向外扩散的趋势等结论。
The main factors that influence the fracture is higher hardness, hydrogen content and stress concentration on the fracture region.───断裂部位较高的硬度、零件中的氢含量以及断裂部位的应力集中情况是影响延迟断裂的主要因素。
This matter has very small volume due to its very high hydrogen content.───这种材料由于含氢量高，因此用量很少（或体积很小）。
The results show that central crack in the defect plate is flake and high hydrogen content induces the ultrasonic test defects.───结果表明钢板中心裂纹为白点缺陷，钢中氢含量高是造成钢板探伤不合的主要原因。
Fluctuation in hydrogen content results from wet air. The dry compressed air is helpful to highly qualified liquid Al.───潮湿的空气会造成含氢量的波动，干燥的压缩空气更有助于获得高质量的铝合金液。
Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal.───焊接和有关工艺.铁素体钢电弧焊金属中氢含量的测定
Changes in hydrogen content in liquid aluminum were measured under different relative humidity of compressed air in low pressure die casting.
The hydrogen content in the sample is read out on DVM.
The author has also studied the direct pressure measurement techniques which is simple and can test out the hydrogen content in aluminum melt with in several minutes.
The hydrogen content in the liquid steel can also be removed effectively by VD vacuum degassing.
Adding the different nanometer CeO2 content to alkali iron powder electrode, the diffusible hydrogen content, low-temperature impact and chemical composition of the weld were tested.
With increasing hydrogen content , the fracture characteristics from dimple to quasi - cleavage.
The on-line testing of hydrogen content in the molten aluminum alloy is very important for producing aluminum alloy castings of high quality.
The hydrogen content in electrolyzed deuterium is an important index to determine the deuterium purity.
The main process parameters include hydrogen content in the gas sources, hydrogen plasma catalyst pretreatment, substrate bias, deposition temperature and plasma flow guiding.