ansys信息详情
n.有限元分析软件
ansys fluent───fluent ansys软件
ansys dyna───ansys动态分析
ansys workb───ansys工作B
adaptative mesh ansys───自适应网格ansys
defeature size ansys───失效尺寸ansys
Utilized general FEM software ANSYS to establish mechanical model and solve.───并利用通用有限元软件ANSYS建立其力学模型并求解。
And ANSYS is a large scale general finite element analysis software with abroad application.───而ANSYS是得到广泛应用的大型通用有限元分析软件。
modelling method of applying ANSYS to match model parameter according to the testing data.───参数为依据，应用ANSYS拟合模型参数的建模方法。
Aimed by the finite element software ANSYS, this paper carries out a dynamical and time-history analysis of a frame structure.───本文以ANSYS有限元软件为工具，进行了框架结构、基础及地基的动力时程分析。
ANSYS was used to calculate the stress within membranes of welded metal bellows used for mechanical sealing.───利用ANSYS有限元程序对机械密封焊接金属波纹管波纹膜片进行应力分析计算。
The static and dynamic characteristics of the beam of a gantry-type machining center are analyzed by means of ADAMS and ANSYS.───对一种国产龙门式加工中心的横梁关键部件，采用机械系统多刚体动力学仿真软件ADAMS和有限元分析软件ANSYS进行了静动态特性分析；
The elastoplastic finite element analysis, strength reduction method and ANSYS software are used for the calculation.───采用弹塑性有限元和强度折减法以及ANSYS软件进行了计算；
Then one of the finite element analysis software, ANSYS was used in this paper for mechanical analysis.───同时按计算机方法，利用ANSYS有限元软件对大桥主要结构部位进行力学分析。
the finite element tool ANSYS and theory calculation were used for the specimen STJ-4, and compared to the experimental results.───采用有限元分析软件ANSYS和理论计算对试件STJ-4进行分析，并与试验结果对比。
Introducing the FEA software ANSYS in numerical simulation, the spatial distribution of magnetic field generated around a high-current conductor during electro-slag remelting was investigated.
By use of finite element analysis software ANSYS, the steady-state temperature field and thermal stress field in the tubesheet of a large fixed tubesheet heat exchanger were analyzed.
The ANSYS software is used to simulate the model of defect, then to calculate the distribution of magnetic line of force.
Then we used ANSYS finite element program to calculate the local stress in anchorage zone of the border span and analysed its local mechanical characteristic.
Then the details of simulating the thermal characteristic of TWT slow-wave structure with ANSYS were given.
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
With ANSYS, This paper applies the trussed beam as supporting beam of trays in big - diameter - distillation tower.
Microchannel model, water-cool laser diode, ANSYS software in design of microchannel condenser.
A general finite element ANSYS of power module is used to calculate wave load against semi-submersible platform. The way of its analysis and calculation processing is also shown in the paper.