aluminum alloys发音

意思翻译

铝合金

相似词语短语

aluminum───n.铝

alloys ex───合金ex

alloys definition───合金定义

wrought alloys───[医]锻制合金

alloys compd───合金公司

foamed aluminum───泡沫铝

brushed aluminum───拉丝铝

aluminum cans───铝质罐；铝包壳

boose aluminum───boose铝

双语使用场景

alloys containing 9% Sn has the best wear-friction properties at room temperature.───常温下含锡量在9%时，合金具有优良的减摩耐磨的综合性能。

Pulse current technique was adopted in hard anodic oxidation of aluminum alloys.───提出将脉冲技术应用于铝合金硬质阳极氧化。

technological properties of laser welding for aluminum and aluminum alloys are described.───概述了以激光为热源的铝及铝合金激光焊接技术特性。

The machinability of a new type material used for the roll-sleeve in the transnormal roll casting of aluminum alloys was researched.───对新型铸轧辊套材料的切削加工性能进行了综合分析；

These alloys are commonly available in the form of sheet, plate and strip, and are the most common structural aluminum alloys.───它们通常用于制作片，板和条，是最常用的结构铝合金。

First, when designing a structure of any kind, don't scroll through the nearest list of aluminum alloys and pick the strongest.───第一，在设计任何结构时，不需要翻遍所有铝合金清单，然后选择强度最大的。

The fading behaviors of the structure refinement effect of electrolytic low-titanium aluminum alloys containing boron were investigated.───对比研究了硼对电解低钛铝合金组织细化效果衰退行为的影响。

Not all aluminum alloys are weldable. In general, the least weldable alloys are also the strongest alloys.───不是所有合金都是可焊的。通常，最难焊接的合金，其强度也最大。

Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.───铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金。

英语使用场景

Dodecyltrimethoxysilane ( DTMS ) films were prepared on LY 12 aluminum alloys by electrochemical deposition.

It is shown that the horn made of aluminum alloys(e. g. Ly12CZ) is apt to adhesion-wear, that makes the resonance properties worsening and leads to decreasing of the acoustic transmitting efficiency.

This kind of semi-processed product which is casted by new aluminum alloys material, is widely used for engines, engineering machinery and part of bearing bush factory. It is welcomed by the customer.

In this paper, the benefit and feasibility of adopting osculatory followers made of aluminum alloys for use in high-speed disk cam mechanisms are systematically delibrated.

The present situation of application and study of master alloy refiners in aluminum alloys was reviewed in this paper.

It can be used for various aluminum alloys. Casting may be made immediately after degassing and slagging off.

Because of the high reflectivity and the high thermal conductivity, aluminum alloys are considered as the forbidden zone of CO2 laser welding.

Hot cracking in aluminum alloys is primarily due to the chemistry of the alloy and the weld bead.

Second, and most importantly, many of the strongest aluminum alloys are not weldable using conventional techniques.