lugs信息详情
n.凸耳（lug的复数形式）；耳状柄
glugs───v.汩汩地倒出来；大口喝；n.倒出的少量饮料（或液体）；汩汩声
luges───n.竞赛用的小型撬；vi.坐小橇内滑雪；n.(Luge)人名；(德)卢格
lungs───n.[解剖]肺（lung的复数形式）
plugs───n.插头；插座；(浴缸、洗涤槽的)塞子；(木头、塑料或腊制的)塞子；（打入墙上孔内以拧进螺钉的）螺钉楔子，螺钉栓塞；棉球，药棉；宣传（plug的复数）；v.插入，塞住；（尤指通过广播或电视）宣传，推广；射击，射杀（plug的第三人称单数）
slugs───n.[无脊椎]蛞蝓；懒汉；子弹（slug的复数）；v.猛击；给…装上子弹（slug的第三人称单数）
bugs───adj.发疯的，疯狂的；n.(Bugs)人名；(德)布格斯
dugs───v.挖，翻土（dig的过去式和过去分词）；n.雌性哺乳动物的乳房
fugs───n.室内的闷浊空气；v.（使）室内空气恶浊；呆在闷室中
hugs───v.拥抱；紧抱；紧贴，缚紧；紧靠，紧挨；暗自庆幸；抱有，坚持；抱住（自己的身体或某物）；n.拥抱，紧抱；（摔跤中）抓握；n.(Hug)（美、墨、西）雨歌（人名）
In general, vessels shall be provided with two earth lugs.───一般情况下容器应有两个接地耳。
harmoniously extended by the lugs.───表壳中段凸耳销和谐的延伸出来。
Saddles, lugs or legs for pressure vessels shall be as per the tables in Vessel Standard.───压力容器的承台、吊耳或支腿应符合容器标准中的表格的要求。
and two fastening pieces are used for fastening tightly the lugs of the two semicircle arciform clamping hoops.───两个紧固件，其用于紧固两个半圆拱状卡箍件的凸耳。
LUGS WITH COPPER OR ALUMINIUM FLATS AND WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.───铝导线用带导电镀层的有铝片或铜片的接头。规则和尺寸。
He lugs samples of it around in a suitcase like some environmental traveling salesman.───他用手提箱携带样本，有如环保旅行推销员。
Lifting lugs are required and shall be attached to the saddle supports . lifting lugs shall not be attached to the vessel pressure envelope.───吊耳是必需的，并且应安装在鞍式支座上。吊耳不能安装在容器的受压件表面。
Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics.───电阻焊接设备.与水冷部分连接的二级连接电缆.尺寸和特性
The doctor lugs a heavy medical bag. Jet lag is a way of life.───白宫的医生们整天背着沉重的医疗箱，时差反应简直就是家常便饭。
He lugs samples of it around in a suitcase like some environmental traveling salesman.
These lugs, combined with the Watts Flange Adapters, provide a ridged rotation free installation.
Lugs should not be used to adjust misalignment in piping.
Large rectangular center lugs produce excellent forward bite, and the "I-Beam" shaped tread delivers for side bite and all-around cornering.
Four lifting lugs shall be welded at the top corners with a payload capacity sufficient for lifting the substation with all the plant inside.
On occasion they rested on lugs left intact by the workman when stripping off the branches.
The chipped area is not between the lugs of adjacent positive and negative plates.
The bolt lugs were made either in solid, Mauser-type pattern, or in interrupted-thread type pattern, depending on the rifle Mark.
A good ground is easy to find; hoisting lugs on the engine or the alternator mounting brackets make good grounds.