heat transfer rate发音

意思翻译

传热速率；热流量

相似词语短语

conduction heat transfer───传导传热

data transfer rate───数据传送速率；数据传送速度，数据率

heat and mass transfer───传热与传质；热质量转移

transfer───v.转让；转接；移交；转移（地方）；（使）换乘；转存，转录；调动（工作）；传染，传播；使（运动员）转队；把（钱）转到另一账户，机构上；n.（地点的）转移；（工作的）调动；已调动的人或东西；权力的移交；运动员转会；（公共汽车、飞机等的）转移；（财产的）转让；数据的拷贝；图画，图案；转车票

heat to heat───热对热

heat───vt.使激动；把…加热；n.高温；压力；热度；热烈

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；价格；等级；vi.责骂；被评价；vt.认为；估价；责骂

transfer paper───n.摹写纸

transfer station───图像转移设备；传送站；传输站

双语使用场景

Usually, it also causes the wall heat transfer rate to decrease somewhat in the region downstream from the point of separation.───通常，它也会使分离点下游区间内的壁热交换率有所减少。

The oil flow rate distribution curve mainly has an "S" shape, and the heat transfer rate shows a "bathtub" distribution.───油冷器各层芯片流量分配曲线大致呈S形分布，而换热量分配曲线呈浴盆状分布。

Additionally, it can only apply to one layer insulation and cannot predict the heat transfer rate after insulation.───此外，只能限于包一层隔热材和无法对隔热材包覆后之散热率之作正确估算。

Increasing the generative chemical reaction parameter increases the surface heat transfer rate and decreases the surface mass transfer rate.───增大生成化学反应会增加表面热传递而减少质量传递。

Due to higher surface area and surface roughness, the heat transfer rate from the heat sink surface to the cooling air increases.───这是由于更大的表面积和更高的表面粗糙度，使其从散热片表面到气流冷却之间的热传导率增加了。

As expected, the heat transfer rate depends on the cooling capacity rate of air.───与预期相吻合，热传导率的大小取决于气流的制冷率。

Higher heat transfer rate as air mass flow rate increases. However, increase of heat transfer rate is less than that of air mass flow rate.───随着气流量增加，热传导率不断升高。然而，传热率的增加幅度要低于气流量的增加量。

The results indicate that the larger diameter of thermosyphon is the better to the enhancement of heat transfer rate.───结果表明：大管径的热管对于提高热管的传冷量是有利的；

英语使用场景

The results show that CF can significantly improve the heat transfer rate of n-Docosane, and the mixing amount and the length of CF are two influence factors.

The heat transfer rate increases extremely quickly causing the water system temperature to overshoot.

However, increase of heat transfer rate is less than of air mass flow rate.

Higher heat transfer rate as air mass flow rate increases.

As expected, the heat transfer rate depends on the cooling capacity rate of air.

However, increase of heat transfer rate is less than that of air mass flow rate.

Additionally, it can only apply to one layer insulation and cannot predict the heat transfer rate after insulation.