heat release信息详情
[热]放热；热放出
release───v.释放；放开；发泄；免除；松开；使不紧张；公开；解禁；放弃（权利）；n.释放；发布；新发行的东西；排放；解脱；新闻稿；让予；宣泄；释放装置
heat to heat───热对热
heat───vt.使激动；把…加热；n.高温；压力；热度；热烈
new release───新版本
astrict release───astrict释放
release notes───发行说明；版本注释
release synonym───释放同义词
stable release───稳定释放
release spa───释放spa
In addition, mass loss rate was not the only parameter influencing heat release rate in cone calorimeter for agaric.───同时，木耳的质量损失速率不是影响其热释放速率的惟一因素。
perfect the calculation, we calculated the heat release rate with the actual diagram of work after testing.───试验后，再根据实测示功图来计算放热率，从而完善了计算。
Once that heat release has cooled the ocean to its freezing temperature, sea ice forms again.───一旦释放出的热量足够多，使海洋达到自己的冰点，海冰又会重新形成。
As a way of maintaining a steady, comfortable temperature, the building features heat release panels high up in the ceiling.───由于保持平稳，舒适的温度的方法，建筑特征放热板高高的天花板。
The selectivity behavior becomes coupled with the heat release behavior for this particular reaction.───对这个具体反应来说，选择特性和放热特性关联起来了。
The heat release rate of diesel and biodiesel etc. on direct injection diesel engine was calculated.───利用该程序计算了直喷式柴油机燃用柴油、生物柴油等的放热规律。
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector.───塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验
Disturbances in the recirculating flow regime can produce related variations in the heat release rate in the primary mixing region .───回流区域内的扰动可使主要混合区内热量释放发生相应的变化。
The selectivity behavior becomes coupled with the heat release hehavior for this particular reaction.
The peak value of initial heat release is decreased and its corresponding crank angle moves close to the top-dead-center along with the increased combustion duration.
Based on the test data of acceleration process of 492Q gasoline engine, a thermodynamic model of combustion heat release rate is developed to study the transient behavior of gasoline engines.
According to the heat release rate, the reaction pathway to ignition of sample alkane is analyzed.
The characteristic values, which are the square roots of heat release rate and pressures on PDSC tests, can be correlated to burning rates of RDX-CMDB by using a liner equation.
The influence of cetane number improver on heat release rate and emissions of a high-speed diesel engine fueled with ethanol-diesel blend fuel was investigated.
An approximate model for predicting flame radiation in both well-and under-ventilated polymer combustion is proposed on the basis of estimation of heat release and flame sootiness.
In an adiabatic system, this heat release serves to increase the chamber temperature.
The control of auto-ignition time and heat release rate is the most difficult technical question in realizing HCCI combustion.