bending stress发音

意思翻译

弯曲应力

相似词语短语

bending───n.弯曲，弯曲度；v.弯曲（bend的现在分词）

stress───n.压力；强调；紧张；重要性；重读；vt.强调；使紧张；加压力于；用重音读；n.(Stress)人名；(意)斯特雷斯

flatwise bending───平面弯曲

bending over───俯身；折转

flexural bending───塑性弯曲

anticlastic bending───抗塑性弯曲

bending moment───[力]弯矩；[力]弯曲力矩；[力]挠矩；弯（曲）矩，挠矩

alternating stress mean stress───交变应力平均应力

shear stress───[力]剪应力；[力]剪切应力；剪应力; 切变应力; 切应力; 粘性摩擦应力

双语使用场景

It can provide the strip with longitudinal tensile stress and transverse bending stress.───它可使被矫带材产生纵向拉伸应力和横向弯曲应力。

Thus the bending stress is very easily computed.───因此，极容易计算出其弯曲应力。

Avoid excessive bending stress by a pulley.───应安装滚轮避免过度弯曲。

Within reasonable limits, the presence of the shearing stress has no effect on the value of the bending stress, and vice versa.───在适当的限度内，剪应力的存在并不影响弯曲应力之值，反之亦然。

Fatigue cracking of a roller is the main failure form due to the alternate bending stress in operation.───滚圈是回转窑最重要的支承部件，运转中弯曲应力造成的疲劳开裂是其主要失效形式。

I have no idea of their having found a better drill bending stress.───我没听说他们找到了能抵抗高弯曲应力的好钻杆。

But the influence of the bending stress was not considered by equal-area method and the pressure area method of reinforcement.───而等面积补强法与压力面积法均未考虑弯曲应力的影响，是不安全的。

Find the value of the bending stress and the deflection at the center if the ribs are omitted.───如果略去肋条，求中心处的弯曲应力和挠度之值。

Formulas of shearing stress and bending stress were derived, and the failure criterion was given in the paper.───推导了根茬在切割过程中受到的剪应力、弯曲应力计算公式，给出了破坏准则。

英语使用场景

Pegs have a larger core diameter and are likely to resist bending stress better than screws, however, screws may provide better grip on individual bone fragments.

Circular-arc-tooth-trace (CATT) cylinder gear differs from straight-cut cylinder gear in calculation of the gear tooth bending stress.

Curvature and bending stress amplitude of double helix in langs of wire rope are much larger than in ordinary lay.

The bending stress varies axially while the average axial stress changes a little.

Axial force has a great effect on deformation of rod or tubing with initial bending stress.

The arithmetic for bending stress of DIGLST is presented after the coefficients of helix angle and contact lines are analyzed by 3-D FEM.

Elementary Elastic Bending theory requires that bending stress varies linearly with distance from the neutral axis, but plastic bending shows a more accurate and complex stress distribution.

Therefore, the BP network model can be used directly in the tooth root bending stress calculation, especially for gear tooth root bending stress calculations of high-precision.

In frequent bending stress condition, fatigue cracking occurred due to the cracking source had been initiated in welding heat affected zone.