bending angle发音

意思翻译

[机]挠曲角，[材]弯曲角

相似词语短语

bending───n.弯曲，弯曲度；v.弯曲（bend的现在分词）

flatwise bending───平面弯曲

bending over───俯身；折转

flexural bending───塑性弯曲

anticlastic bending───抗塑性弯曲

bending moment───[力]弯矩；[力]弯曲力矩；[力]挠矩；弯（曲）矩，挠矩

angle───n.角，角度；视角；立场；角铁；（古）鱼钩；v.斜移；从……角度提供信息；钓鱼；谋取

healing angle───愈合角

face angle───齿面角；[数]面角

双语使用场景

bending Angle increases with an increase of the energy density.───增加能量密度，板料的弯曲角度显著增大。

The reasons that the bending angle decrease with the number of irradiation are analyzed by using the built model.───用建立的模型分析了多次扫描过程中随扫描次数增加弯曲增量逐渐减小的原因。

This paper introduces how to obtain and assimilate the GPS bending angle.───文中介绍了如何获得及同化GPS折射角资料的原理。

do not use, we recommend that the lights turn back the body in situ, to better maintain a permanent compact The bending angle.───不使用时，建议将灯身折回原位，以便更长久保持紧致的折弯角度。

Rotating shoulders, spine bending angle remains unchanged, and the head behind the move to the ball position.───在旋转肩膀时，一直保持脊椎弯曲角度不变，且头部移动到球位的后面。

At the same press bending angle, the cross section distortion of the tubes decreases by increasing the distance between the die fulcrums.───在相同的压弯弯曲角度下，增大凹模支点的间距可以减小管坯截面的畸变。

Relationship between the bending angle and geometry of sheets and technological parameters is discussed.───论证了板料的几何参数和工艺参数与变形的相互关系。

For the same amount of bending angle, the springback increase linearly with the increase of bending radius.───对于一定的弯曲角度，零件端部回弹量随弯曲半径的增加而线性增加；

The bending angle of a joint is related to its inner air pressure.───关节弯曲角度与关节内的气体压强有关；

英语使用场景

Researched friction loss and ultimate strength of external prestressing tendon considering deviator curvature radius and bending angle of prestressing tendon.

The bent-tube is a kind of special part with rectangular section, which has a right bending angle, and the traditional bending process is unsuitable.

The results show that: the springback angle of bent tube increases with the bending angle, the gap between mandrel and tube, and the hardening coefficient, but decreases with the hardenability value.

The atmospheric refractivity profiles below the height of the GPS receiver are obtained with this inversion technique, as well as the bending angle of rays.

A simple focusing technology is proposed. The influences of laser power, scan times, scan rate, distance of focusing on bending angle are analyzed respectively.

Bending angle about material augments along with laser power and laser light spot diameter augment, but bending angle about material minishes along with laser scan rate and material hardness augment.