axis of bending信息详情
弯曲轴，弯曲轴
bending───n.弯曲，弯曲度；v.弯曲（bend的现在分词）
axis───n.轴线; 坐标轴; 轴心；n.轴；轴线；轴心国
axis of symmetry───[数]对称轴；对称轴线
flatwise bending───平面弯曲
axis bank───轴心银行
bending over───俯身；折转
flexural bending───塑性弯曲
anticlastic bending───抗塑性弯曲
bending moment───[力]弯矩；[力]弯曲力矩；[力]挠矩；弯（曲）矩，挠矩
The adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.───弯曲半径的调节主要是通过更换弯曲半径的调节轴来实现。
This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.───本文对在应用应变式扭矩传感器时由于在弹性轴上的弯矩而引起的误差进行了力学分析，并提出了消除的方法。
order to adjust the bending Angle, the t type slide seat and bending press plate were used. The adjusting of bending radius was implemented by replacing the adjusting axis of bending radius.───采用T形滑座与弯曲角两边的压板调节，从而达到在一定范围内调节弯曲角度的目的，弯曲半径的调节主要是通过更换弯曲半径的调节轴来实现。
When the axis of bending when the volume of small (long axis 1% or less), can be used in the cold under the jack than the straight helix.───当轴的弯曲量不大时（为轴长的1%以下），可以在冷态下用螺旋千斤顶较直。