adhesion force发音

意思翻译

[力]附着力；粘附力

相似词语短语

adhesion───n.粘附；黏附（力）；支持；固定；

fibrous adhesion───纤维性粘连

adhesion promoter───助粘剂，附着力促进剂

adhesion belt───黏合带；粘合带

adhesion test───附着试验；粘连试验；附着力试验

homotypic adhesion───[医]同质性粘附

adhesion molecules───黏附分子；粘附分子

adhesion molecule───[医]黏着分子，黏附分子

force───n.力量；武力；军队；魄力；n.(Force)人名；(意)福尔切；(英、法)福斯；vt.促使，推动；强迫；强加

双语使用场景

adhesion force between the spheres and the chip surface was affected by the ligand surface concentration.───球与基片表面的结合力受到配基面密度的影响，说明发生结合的是多对而非单对蛋白质分子。

surpassed the properties including water-resistance, weather durability and adhesion force.───水性、耐候性、附着力等性能均超过相应国家标准。

METHODS Orthogonal design was used with the adhesion force as the index in the experiment.───方法采用正交设计法，以黏着力为指标，对巴布剂基质配比进行实验研究。

Results The adhesion force and cohesive strength could be affected by the contents of sodium polyacrylate, PVA, Gelatin.───结果配方中各因素对粘着力、剥离强度的作用大小依次为聚丙烯酸钠、聚乙烯醇、明胶。

With the increase of the sintering temperature, the adhesion force of Ni electrodes enhances, and the square resistance decreases.───结果表明，随着烧结温度的增加，镍电极附着力逐渐增大，方阻逐渐下降；

Lab experiments shows that the lubricant have important influence on adhesion force, lubrication and surface tension.───室内实验表明，润滑剂对粘滞系数、润滑性以及表面张力有重要的影响。

Specific Properties: Non-toxic, passed "SGS" safety, and Enviromental. Good Flow properties Adhesion force. Easy operating.───特性：无毒、合乎环保要求，流动性好，硬性，快固化，粘合力强，易操作。

The crude emulsion has high adhesion force, so it can carry more mechnical impurity, and block the oil bed.───原油乳化液具有较高的粘附力，携带的机械杂质给油层造成堵塞。

Single Micropipette Aspiration Technique for Measuring the Shearing Adhesion Force of Cells───单微吸管测量细胞切向粘附力方法的研究

英语使用场景

And the bogie is one of the major components of a vehicle, it transfer every kind of forces, and produce tractive force using adhesion force between wheel and rail.

TOP BEST-665 has high surface adhesion force on vacuum bag and a variety of tools. It is cost-effective and shows excellent sealing performance.

TOP BEST-661 has high surface adhesion force on vacuum bag and a variety of tools. In the curing cycle it has excellent seal, and very easy to remove from the cold or heating surface after the curing.

It was found that the adhesion force between the spheres and the chip surface was affected by the ligand surface concentration.

The modification the resin matrix can enhance the adhesion force to temperature alter and heat proof.

Results The adhesion force and cohesive strength could be affected by the contents of sodium polyacrylate, PVA, Gelatin.

The lean setae with large end had anisotropy adhesion property, and during the forward sliding course the shear adhesion force was 3.5 times greater than that during the backward slipping course.

The causes of polluting molds surface were analysed in this paper. The main adhesion force between the rubber particles of the molds surface and the substrate is van der waals force.