bath temperature发音

意思翻译

镀浴的温度；电解质温度；熔体温度

相似词语短语

temperature───n.温度；体温；气温；发烧

bath───n.沐浴；浴室；浴盆；vt.洗澡；vi.洗澡

critical temperature───[物][电子]临界温度；n.临界温度

whirlpool bath───漩涡浴

take bath───洗澡

temperature outside───室外温度

temperature rise───[电]温升；温度上升；温度上升，温升，升温

constant temperature───[热]恒温；定温；等温；等温，恒温

fluctuating temperature───波动温度；脉动温度；脉动温度，波动温度

双语使用场景

The ultrafiltration rate of pure water with the coagulation bath temperature increased.───随着凝固浴温度的升高，所成的膜的透水速率上升。

Coagulant bath temperature had a strong influence on PU, PES composite flat membrane.───凝固浴温度对填充聚合物平板膜有很大影响。

Try to put vanities, bath temperature water, such as water turbidity found to water until the clear-up.───试放面盆、浴缸的冷热水，如发现水质混浊，须放水，直到水清为止。

The grain size of Pd is increased with increasing current density or bath temperature, but is slightly affected by coating thickness.───钯镀层的晶粒尺寸随电流密度的增加或温度的升高而变大，但受膜厚的影响不大。

The preheat oven is used to bring the pump up to the metal bath temperature.───进口工业网的预热烤箱是用来使泵送金属浴温度。

But only to the radiation to the local area heating, without giving the whole a warm bath, bath temperature equilibrium.───但是，只有到当地，辐射加热，而不给予整个热水澡，浴室的温度平衡。

Improve the bath temperature, and check the temperature control system.───提高浴温，并检查温控系统。

These crosslinkers are stable in water at normal bath temperature but become reactive at curing temperatures.───这些交联剂于正常槽液温度下在水中很稳定，但在固化温度下就变得活泼起来。

A Fuzzy-Expert Control of the Aluminum Electrolysis Bath Temperature and Ratio───铝电解质温度和分子比的模糊专家控制

英语使用场景

The effects of current density, bath temperature and coating thickness on the solderability and wetting balance of Pd coating electroplated on phosphor-bronze were studied.

The retention rates of Albumin bovine decreases when coagulation bath temperature increases, and first decreases, then increases when pre-evaporation time prolongs.

The water flux increases along with the prolonging of pre-evaporation and the increasing of coagulation bath temperature.

The influence of ammonium molybdate, cobalt sulphate, ammonium bifluoride, acidity of blackening bath, blackening bath temperature and time on film quality were studied.

Porosity increases along with the increasing of coagulation bath temperature, and doesn't have relation to pre-evaporation.

The bath temperature, liquidus and anode effect were controlled by adjusting the AlF3 additions, aluminum tapping magnitude, cell voltage set-point and the alumina feeding interval.

Microcomputer control, touch switches, seven files of arbitrary power conditioning, meet the needs of different bath temperature, faster and more comfortable.