displacement curve发音

意思翻译

[船]排水量曲线；[船]排量曲线；驱替特征曲线

相似词语短语

displacement───n.取代，位移；[船]排水量

curve───vt.弯；使弯曲；adj.弯曲的；曲线形的；n.曲线；弯曲；曲线球；曲线图表；vi.成曲形

stupidity curve───愚蠢曲线

displacement definition───位移定义

displacement value───置换价

displacement map───置换贴图

displacement activity───替代活动；[心理]替换活动

displacement calculator───位移计算器

audibility curve───可听度曲线

双语使用场景

The force-displacement curve and the deformation are calculated.───计算了结构压缩的载荷-位移曲线和变形情况。

This function describes the envelope of the displacement curve.───这函数描绘出位移曲线的包络。

There are two stress drops on the stress-displacement curve.───在应力位移曲线上表现为两次应力降。

It is shown in the load-displacement curve that the instability failure of the tower crane is maximum point instability.───从荷载—位移全过程曲线可以看出，塔吊的失稳为极值点失稳，失稳破坏为延性破坏。

In this test the material between two small holes was sheared, and the load-displacement curve is obtained.───这种方法通过对两小孔之间的材料小区进行剪切试验，测量其载荷位移曲线。

At the same time, discussions are made on a typical load displacement curve of weldbonded joins in tensile shear test.───同时，对胶焊搭接接头拉伸剪切试验的载荷—位移曲线作了讨论。

In the test which is based on the development of displacement loading, its resuming force-displacement curve is a hysteretic loop.───在对其进行基于位移加载的动态试验中，其恢复力-位移曲线为一迟滞环。

Derivation and application of A New Water displacement Curve Equation───一种新型水驱特征曲线方程的推导及应用

英语使用场景

The measurement of impact-scraping load displacement curve of sealing coating used in aircraft engine can be done with the electronic impact-scraping tester developed by ourselves.

At the same time, discussions are made on a typical load displacement curve of weldbonded joins in tensile shear test.

Using Load-time, Displacement-time and Load displacement Curve achieved by a Bar Impact Testing Machine determines dynamic fracture toughness KId and the groove opening displacement V for marble.

The load displacement curve under static load, load displacement hysteric curve under repeated low cycle load and strain data at key points are presented.

A general-purpose follower displacement curve data sheet, fulfilling various kind of law of motion, is implemented for the globoid cam mechanisms used in an automatic tool changer.

The impact scraping load displacement curve and scraping work can be measured by the machine.