drilling line发音

意思翻译

[油气]钻井用钢丝绳

相似词语短语

drilling───n.钻孔；训练，教练；演练；v.钻孔；训练（drill的ing形式）

drilling down───向地下钻；深度探讨

crowner drilling───冠钻

drilling operation───钻井作业

drilling hole───钻孔

drilling jobs───钻井作业

choral drilling───齐声练习

ocean drilling───海洋钻探

drilling team───钻井队

双语使用场景

we need to slip the drilling line very often?───我们需要经常滑大绳吗？

Feed the new drilling line (fast line) through the side of the drawworks drum.───把快绳头穿过绞车辊筒的一边。

Ensure that the drilling line is in tension at all times. Slack in the drilling line can not be tolerated.───确保大绳一直处于拉紧状态，不允许把大绳缠松出间隙。

Evaluation of the service life of a rotary drilling line is of great importance to ensuring safe drilling and reducing drilling cost.───钢丝绳使用寿命评定对确保钻井安全与降低钻井成本具有十分重要的意义。

The reeling out of the drilling line is powered by gravity and reeling in by an electric motor or diesel engine.───松开钢丝绳是依靠重力的作用，而缠绕钢丝绳则是借助于电马达或柴油机。

Insert the drilling line from the spool through the snatch block up to the rig floor and secure.───把大绳从储备筒上拉出来，穿过开口滑轮，引上钻台，绑住。

The driller checks the end of the new drilling line for damage, and cut off any defective section by using of a hydraulic line cutter.───司钻检查新大绳的快绳头，如有任何损伤或缺陷，就用液压切绳器把它切掉。

Always slip and cut the drilling line with the drill string in the cased hole and the bit is at or near the casing shoe.───滑大绳或者倒大绳时，一定要把钻具下到套管内，使钻头处在或接近套管鞋。

Warning: ensure that no person is inside the loop of the drilling line during the next step.───注意：在进行下一步作业时，人不能站在大绳盘的环内。

英语使用场景

The primary function of the drawworks is to reel out and reel in the drilling line, a large diameter wire rope, in a controlled fashion.

Business owners lathe, planer, milling, drilling, line cutting, and other processing equipment.

For added holding and pulling strength, drive four nails through the snake and the drilling line, and wrap the snake with soft wire and tape the entire length.

The driller ensures that the drilling line is wrapped with the soft wire or tape at both sides of the mark before cutting the drilling line with the hydraulic line cutter.

The driller must ensure that the drilling line is reeved in under tension and that the drilling line is properly seated in the drum grooves.

With the new drilling line properly reeved on to the drawworks drum, pick up the weight of the traveling block, test the drawworks brake, and verify that the drilling line is tight on the drum.