cooling temperature发音

意思翻译

冷却温度

相似词语短语

cooling───adj.凉快的，凉爽的；冷却的；n.(Cooling)（英、美）库林（人名）；n.冷却，降温

temperature───n.温度；体温；气温；发烧

heart cooling───心脏降温

cooling medium───[制冷]冷却介质；冷媒

cooling towel───冷却毛巾

cooling agent───[制冷]冷却剂

cooling curve───[晶体]冷却曲线；步冷曲线

cooling systems───冷却系统

critical temperature───[物][电子]临界温度；n.临界温度

双语使用场景

influence of rolling temperature, final cooling temperature, cooling speed and micro-alloying on microstructure and properties were investigated.───分析了轧制温度、终冷温度、冷却速度以及微合金化对钢筋组织、性能的影响。

ratio of acicular ferrite may increase by raising cooling speed and decreasing final cooling temperature.───提高冷却速度和降低终冷温度可以增加针状铁素体的比例。

The main reasons of CSP work roll flaking in Lianyuan Steel are the uneven slab temperature, uneven roll cooling temperature and the rolling accident.───涟钢CSP工作辊发生剥落的主要原因是板坯温度不均、轧辊冷却温度不均和轧制事故。

Spheroidal annealing structure is satisfactory and hardness increases with the decrease of final cooling temperature.───随着终冷温度的降低，轴承钢球化退火后球化组织均匀，硬度增大。

The quenching quality of heavy rail was directly influenced by temperature of heat treatment and air cooling temperature.───重轨热处理温度及气冷温度对重轨淬火质量的提高有直接的影响。

The heating and cooling temperature and time were important in the rotational micro-wave heating molding.───微波加热的加热温度和加热时间在微波加热工艺也具有着重要的作用。

It takes time for the cooling temperature to stabilize.───冷却水温度安定时间长。

the target temperature of a fast-cooling area is set according to the cooling temperature required by the cooling load;───根据冷却负载所需冷却温度，相应地设置快冷区域内目标温度；

The results showed the higher the cooling temperature of water bath, the higher the initial crystallinity would be;───结果表明：水浴冷却温度越高则薄膜的初始结晶度越高；

英语使用场景

In the simulation, thermal and mechanical properties, concrete construction, pipe cooling, temperature variation of environment. crown filling and water impoundment orders are considered.

To achieve the same final cooling temperature at constant cool-down different laminar cooling patterns play important roles in the cool-down rate along plate gauge and temperature distribution.

The lower finish cooling temperature, the shorter interlamellar spacing in pearlite colonies and the higher tensile strength and ductility are.

The heating and cooling temperature and time were important in the rotational micro - wave heating molding.

To achieve the same final cooling temperature at constant cool-down rate, different laminar cooling patterns play important roles in the cool-down rate along plate gauge and temperature distribution.

The influences on washing soda were discussed, including cooling temperature distribution of cooling kettle, the medium and stir speed of mixer, the retention period of material in cooling material.