clamp force发音

意思翻译

夹紧力

合模力

相似词语短语

clamp science───夹具科学

sliding clamp───滑动压板

earth clamp───接地夹子[端子]；[电]接地夹子；地线夹

cable clamp───[电]电缆夹；索卡; 线夹

damper clamp───减震器夹

anastomosis clamp───n.吻合夹

clamp back───夹紧

clamp meter───钳型电流表

clamp off───冲砂

双语使用场景

We all know that if you don't have enough clamp force for the projected area of the parts, flash will result.───我们都知道对于相应的产品投影面，如果没有足够的锁模力的话，可能会有飞边产生。

Clamp force parameter setting is very important in plastic injection molding.───注塑生产中，锁模力参数设计十分重要。

obtain the best gate location addition, the position of air bubble and the clamp force were forecasted.───预测可能存在的气泡位置及锁模力的大小，确定最佳浇口位置。

When the close time of the nozzles was set at the end of packing, the injection pressure, clamp force and parts quality were all better.───同时当浇口均设置为保压结束时关闭，成型中的注射压力、锁模力以及制件质量较为理想。

This method of evaluating the slip rate was introduced in the clamp force control used on CVI and tested on rotary drum lest bench.───将该滑移率评估方法在无级变速器夹紧力的防滑控制中进行应用，并在转鼓试验台上进行实车试验。

So, the angular distortion decreases under the action of the gravity of specimens and the clamp force of jigs.───在重力和夹具夹持作用下，焊接试板的角变形减小。

Because the theoretical calculating method of clamp force is very complex, a simplified experiential calculating method is provided.───鉴于锁模力的理论计算较为复杂，本文提出了一种简化的计算方法。

Calculation of the Mould Clamp Force of Injection Moulding Machine───注塑机锁模力的计算

英语使用场景

We all know that if you don't have enough clamp force for the projected area of the parts, flash will result.

The system consists of optimal module of clamp force, control module of clamp force, executive module of clamp force, etc.

So, the angular distortion decreases under the action of the gravity of specimens and the clamp force of jigs.