buffer layer发音

意思翻译

缓冲层

相似词语短语

layer───vt.把…分层堆放；借助压条法；生根繁殖；将（头发）剪成不同层次；n.层，层次；膜；[植]压条；放置者，计划者；vi.形成或分成层次；[植]通过压条法而生根

cacodylate buffer───[医]二甲胂酸-二甲胂酸钠缓冲液，二甲砷酸盐缓冲液；二甲胂酸缓冲液

buffer space───缓冲间隔

staining buffer───染色缓冲液

body buffer───车身缓冲器

stencil buffer───模板缓冲

buffer stock───缓冲库存；调节性库存储备

outer layer───外层（细胞次生壁外面的一层）

buffer fly───缓冲飞行

双语使用场景

The middle class is a buffer layer in the structure of social interests.───中间阶层是社会利益结构中的缓冲层。

In order to resolve this problem, we have introduced the buffer layer.───为了解决这个问题，我们引入了缓冲层。

larger the plastic deformation of the buffer layer, the higher the joint strength.───缓冲层塑性变形愈大，接头强度愈高。

and the compressible polymer material can be also increased to be injected into the buffer layer.───还可用可压缩高分子材料增加注射成缓冲层。

The amorphous into*ce layer dissipates strain and permits the growth of a high quality monocrystalline oxide accommodating buffer layer.───非晶界面层释放应力并允许生长高质量单晶氧化物调节缓冲层。

The product is separated from the principle of suction by the absorption layer, a buffer layer, integrated sound insulation layer formed.───该产品采用外隔内吸的原理，由吸声层，缓冲层，隔声层综合而成。

Furthermore, the effect of solder ball layout and stress relax buffer layer material on the fatigue life of solder joints is studied.───最后探测锡球配置方式和缓冲层材料性质对于锡球疲劳寿命的影响，以获得高可靠度的封装结构。

Buffer layer is used to connect the base body and super-hard abrasive layer, from the binder composition, and sometimes can be avoided.───过渡层用于连接基体和超硬磨料层，由结合剂构成，有时也可省去。

The accommodating buffer layer is lattice matched to both the underlying silicon wafer and the overlying monocrystalline material layer.───调节缓冲层与下面的硅晶片和上面的单晶材料层都晶格匹配。

英语使用场景

As for the performance of UVcured optical fiber buffer coating, the main concerns are the curing speed, strength, stripping force and additional loss of the buffer layer.

Simulation results based on this model show that the total amount of impurity in the buffer layer or transparent anode is the key to determine the on-state voltage drop of GCT device.

Epitaxial growth of LBD and laser on single crystal silicon film quartz substrate or single crystal silicon film quartz substrate deposited buffer layer.

Now coated superconductors normally have three layers: substrate, buffer layer and superconducting thin film.