roundness信息详情
n.圆；球形
rotundness───圆形
boundness───有界性；约束物
soundness───n.健康；稳固；完整；公正
roundedness───圆形
jocundness───诙谐
rousedness───觉醒
fondness───n.爱好；喜爱
loudness───n.[声]响度；吵闹
proudness───骄傲
But then again,what is the apple once you take away its roundness, redness, etc.?───但话又说回来，一旦你拿走苹果的圆的形状和红的颜色等，那么到底什么是苹果？
His face had lost its boyish roundness.───他的脸已不是小时候那副圆圆的娃娃脸了。
also be straight and not too curvyto downplay the roundness of the face.───也可以是直的，不用过于弯曲使脸显得不那么圆。
The cross section shapes of the pits are same with that of the lock hole of the intramedullary nail, which are roundness or ellipse.───凹坑的横截面形状和髓内针锁孔的横截面形状相同，横截面形状是圆形或者是椭圆形。
He gave us the results in round numbers, but their roundness didn't affect the point he was making.───他给我们的是整数结果，但其取整不影响他提出的论点。
Numerical results showed that on this assumed condition, the smaller the tolerance of roundness is, the longer the fatigue life of hole.───数值模拟结果表明，在此假定条件下，孔的圆度公差越小，孔的疲劳寿命越大；
The straightening process is generally used to eliminate the longitudinal bending and the roundness error of the rolled seamless steel pipe.───为了消除无缝钢管轧制后的纵向弯曲及圆度误差，一般要采用矫直工艺。
NON-ROTATING STEM Non-rotating stem has close roundness and straightness tolerances and is burnished for a superior finish.───不旋转阀杆不旋转阀杆具有精密的圆度和平直度公差，并且经过抛光达到极高的抛光度。
Researches are made to find out the active tracing measurement strategy of crankshaft roundness error during non circular grinding process.───采用非圆磨削加工曲轴可在一次装夹完成主轴颈和连杆颈的磨削。
The roundness of the pleat is improved by filling it with a little wadding or a tube of curtain buckram.
His face had lost its boyish roundness.
Whiteness, roundness, and bravery are abstractions.
Drops of water affect roundness.
The mouth presents ampleness and roundness.
Smooth and finish the crankpin to roundness.
Richard moved his tongue on the roundness and the ragged break and the folds of foreskin wrinkled and pulled tight.
Her hairstyle exaggerates the roundness of her face.
The mouth has a roundness and a good flexibility.