hardening process发音

意思翻译

硬化过程；硬化法

相似词语短语

hardening───v.硬化；使强壮（harden的ing形式）；n.硬化；淬火；锻炼

dispersion hardening───弥散硬化

hardening point───[机]硬化点

hardening of───硬化

precipitation hardening───[机]析出硬化；淀积硬化；淀积[脱溶]硬化

hardening exponent───硬化指数

hardening plan───硬化计划

hardening constant───硬化常数

hardening off───使受冷而变得耐寒

双语使用场景

case hardening process results in gears that have much harder surfaces than cores.───淬火处理的齿轮具备比心部组织硬度高的表面硬度。

To speed up the hardening process, artificial aging is employed.───加快硬化过程中，人工时效是就业。

concrete mixture into the sea immediately started the hardening process and rather than just dissolving in the mass of water, the substance was tough and long-lasting.───混凝土混合物倒入大海后立即开始硬化过程，而且该物质非但不会在水中溶解，还保持坚硬耐久。

The moral structure, created by the mind to hold social relationships together, is not love, but a hardening process like that of cement.───由头脑建立的用来维系社会关系的道德构架，它不是爱，而是一个像水泥一样的硬化过程。

For horses with OC, the cartilage at the top of certain growth plates does not undergo the normal hardening process and may break down.───患有骨软骨病的马，在某些长骨端的骺板，不进行正常的硬化过程，甚至可能会碎裂。

The case hardening process results in gears that have much harder surfaces than cores.───局部淬火处理的齿轮具有比心部组织硬度高的表面硬度。

Electrolytic hardening process was developed in USSR in 1950s. The process was developed but was not commercially exploited.───电解硬化是前苏联在上世纪50年代开发的，然而当时并没有用于商业性生产。

Various factors which affect the intercritical hardening process of U shaped steel have been studied.───对影响U型钢亚温淬火工艺的各因素进行了试验。

Therefore, stopping the hardening process of particles from growing is the key of increasing CO2 sodium silicate sand bond strength.───所以，提高CO2水玻璃砂粘结强度的关键在于抑制硬化过程中胶粒的过于长大。

英语使用场景

The Non Destructive Testing ( NDT ) system is primarily a poke yoke device for the induction hardening process.

Electrolytic hardening process was developed in USSR in 1950s. The process was developed but was not commercially exploited.

The feature of hardening layer is usually expressed by its hardness and depth, and the micro-structure of its material is determined by the hardening process.

The author sum up experiences about laser surface hardening process of many years.

The formation of the residual stress during hardening process of the resin coated sand was analyzed, and some main measures to control the residual stress were proposed.

With the increased angularity index of the manufactured sand, the fluidity of the new mortar is becoming bad but the intensity and contractibility is improving after the hardening process.

Therefore, stopping the hardening process of particles from growing is the key of increasing CO2 sodium silicate sand bond strength.

Defect on inner diameter; large NCU condition indicating lack of stock for regrinding within specifications, machined undersize in green operation or caused by error in hardening process.