gating system信息详情
浇流系统
system───n.制度，体制；系统；方法
verging system───垂尾系统
system cache───系统缓存
complement system───补体系统；求补系统
justification system───辩护制度
septic system───化粪池系统
capitulary system───头状系统
purification system───净化系统
bus system───[计]总线系统；汇流排系统；总线系统，汇流排系统
Design and characteristics of gating system for cast iron in Spain automobiles have been described.───了西班牙对汽车铸铁件浇冒口系统的设计方法及其设计特点。
gating system of this casting is far from being complicated.───这个铸件的浇注系统一点也不复杂。
The results show that the algorithm has a very good effect and provides a basis for optimizing design of gating system.───结果表明该算法具有很好的效果，为浇注系统的优化设计提供了依据。
A comparison was made between the bottom gating system, middle level gating system, and step gating system.───对底注、中注及阶梯注三种浇注系统进行对比。
Parting surface was designed in terms of the shape, dimension of the parts and requirements of gating system and die-released.───根据压铸件的形状、尺寸，以及浇注系统和脱模等要求，设计分型面。
It is not possible to design a good gating system without knowing as intimately as possible all the customer requirements for this part.───没有充分了解客户对此零件的所有要求就不可能设计出良好的浇口体系。
Feeding effect can be improved with qualified casting using side-riser gating system for plate or heavy concave aluminum alloy casting.───对于平板类、厚大凹型类铝合金铸件，采用边侧冒口的浇注系统，能提高铸件的补缩效果，生产出合格铸件。
The process was described, and the design parameters of both the gating system and riser, as well as the chills were given in the paper.───对这种工艺方法进了介绍，并且给出了包括浇注系统、冒口、冷铁等的工艺参数设定范围。
For the investment casting required for X-detection, the liquid steel should be smoothly filled in designing gating system.───要求作探伤检查的铸件设计浇注系统时应使钢液充型平稳。
A comparison was made between the bottom gating system , middle gating system , and step gating system.
Design and characteristics of gating system for cast iron in Spain automobiles have been described.
The foundry method scheme, gating system design, melting and treatment of the molten iron was described.
The reason for feeding effect improvement of the gating system is analyzed preliminarily.
The newly developed method of gating system design for zinc alloy in die casting is introduced.
The casting technique with top gating system, outer shaped iron chill, compound casting mold and core assembly molding was used for producing aluminum impeller on a large scale successfully.
During the mold design, gating system and cooling system designed and optimized with CAE technology.
The liquid metal flow during mould filling in bottom gating system and its influence on the casting quality are introduced emphatically .
A comparison was made between the bottom gating system, middle level gating system, and step gating system.