fracture surface发音

意思翻译

断裂面

相似词语短语

surface───vi.浮出水面；vt.使浮出水面；使成平面；adj.表面的，肤浅的；n.表面；表层；外观；n.(Surface)人名；(英)瑟菲斯

fracture───vt.使破裂；n.破裂，断裂；[外科]骨折；vi.破裂；折断

calcaneal fracture───[医] 跟骨骨折

fracture strain───断裂应变

surface data───曲面数据；表面数据；地面资料

placid surface───平静表面

hot surface───热表面; 放热地面

navicular fracture───舟骨骨折

metatarsal fracture───[医] 跖骨骨折

双语使用场景

The fracture surface traverses matrix as well as fibers and interface .───断裂表面横切过基体、纤维和界面。

Scatter and fracture surface roughness increases with loading rate.───分散性和断裂表面的粗糙度随加载率而提高。

fatigue fracture surface features of blade are summarized firstly.───归纳总结了叶片疲劳断口的特征形貌。

Rough fracture surface is of characteristics of fractal and can be considered as congruence of the upper and lower fracture surfaces.───岩体裂隙面是粗糙不平的，具有分形特征。

The spiral shape of the fracture surface indicates that the shaft had been overloaded by a high torque prior to breaking.───螺旋外形地断裂面标明，该井已超负荷由一个高转矩之前，要突破。

However, for AISI 316, hydrogen barely changed the fracture surface morphology of notch specimen in comparison with that in air.───然而，对AISI316而言，和在空气中测试的试片比较起来，氢气几乎没有改变凹槽试片的破断面形态。

The fracture surface of a failed injection valve nut of diesel engine high pressure oil pump was investigated by visual and SEM.───对断裂的汽车柴油机高压出油阀紧座的宏观、微观断口及显微组织进行了研究。

The effects of testing temperature on notch impact strength, fractographic features and fracture surface roughness of PVC have been studied.───研究了温度对聚氯乙烯PVC缺口冲击强度、断口形貌特征及断面粗糙度的影响。

And the fracture mechanism was analyzed by observing the fracture surface morphologies through scanning electron microscope.───采用扫描电子显微镜对其断口形貌进行观察；

英语使用场景

The fracture surface indicates that the mechanism of the superplastic deformation in AZ91 alloy is controlled by the grain boundary sliding accompanied with cavities interlinking.

The effects of macroscopic fracture surface patterns and microstructure of slag of stainless steel electrode on the slag detachability have been analyzed.

The impact fracture surface showed a tough morphology for POM/NBR/Novolak blends and brittle one for POM/NBR blends.

The microstructure and fracture surface of the two ultrahigh strength steels are analyzed by metalloscopy and scanning electron microscopy (SEM).

The ultimate fracture surface was also proposed. The calculated alternating stress intensity of the structure confirmed the fatigue failure position ulteriorly.

The fracture surface appeared intergranular crack, due to the oxide formed during tensile test.

The Scanning electron microscopy(SEM) photographs of fracture surface of the hybrid material show that the hybrid material presents homogeneous system without obvious inorganic particle forming.

The fracture surface is rather rough in sinusoidal vibration, while is smooth in random vibration.

Microstructure, properties and fracture surface of high strength titanium alloy TB 2 cross - rolled tube were studied.