flexural strength信息详情
挠曲强度
flexural yield strength───弯曲屈服强度
flexural───adj.弯曲的；曲折的
strength───n.力量；力气；兵力；长处
flexural modulus───挠[弯]曲模量；[力]弯曲模量；[力]挠曲模量
shear strength───切变强度
flexural bending───塑性弯曲
flexural dermatitis───弯曲性皮炎
sapped strength───磨损强度
vulcan strength───瓦肯力量
Results showed that the flexural strength of ESMC parts was different at different direction of fiber orientation.───研究表明制品在各流动方向上的弯曲强度有很显著的差别。
Infiltrated ceramics with similar flexural strength have similar microstructures under SEM.───强度相同的四种渗透陶瓷SEM表现也相似。
relationship between nucleation temperature and flexural strength was investigated.───探讨了核化温度与抗弯强度之间的关系。
In the project, the major checking points are the top section flexural strength and the bottom anti-slip stability of the wall.───其中，墙顶截面抗弯强度与墙底抗滑移稳定性是工程验算重点。
It was also found that the flexural strength and shear strength can be satisfactorily predicted based on the maximum pit depth.───利用平均最大孔蚀深度来估计剪力强度与挠曲强度，可得令人满意的结果。
The stretch strength, flexural strength and impact strength of intumescent flame retardant PP composites have been enhanced distinctly.───阻燃材料的拉伸、弯曲、冲击强度明显得到提高。
The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.───研究了复合材料的拉伸强度、冲击强度、弯曲强度、形态及热性能。
The results showed that the tensile strength, flexural strength and flexural modulus increased obviously with increase of amount of Mica.───结果表明，复合材料的拉伸强度、弯曲强度和弯曲模量随着云母用量的增加而提高。
Testing the setting time, flexural strength, compressive strength, water retention, adhesive strength of gypsum with the adhesive agents.───对掺加粘结剂的脱硫石膏的凝结时间、压折强度、保水性能、剪切粘结强度的测试。
AIM:To compare the compressive strength, tensile strength and flexural strength of bulkily filled and incrementally filled visible light-cured composite resin.
The flexural strength and tensile strength slightly decreased.
The material mechanical properties, such as flexural strength, are measured by three point bending techniques.
Sentencedict.com try its best to gather and build good sentences.
The calculation of flexural strength of reinforced concrete members in Code for Design of Concrete Structures (GB50010-2002) is the equivalent rectangle method based on the plane section assumption.
Flexural strength and elasticity decreased significantly with increasing wood content.
Pultruded fiberglass is stronger, and has higher flexural strength than timber.
The relationship between nucleation temperature and flexural strength was investigated.
The tensile strength, impact strength, flexural strength, thermal properties and morphology of the composites were investigated.