firing temperature信息详情
[陶瓷]烧成温度；点火温度；发火点
firing───n.开火；发射；烧制；解雇；n.(Firing)（挪、美、荷、加、丹）法尔林（人名）；v.开火；烧制；解雇；点燃；激励（fire的现在分词）
temperature───n.温度；体温；气温；发烧
firing pattern───爆破钻孔型式，钻孔布置平面图；放电模式
firing line───作战最前线，射击线；n.射击线，作战最前线
critical temperature───[物][电子]临界温度；n.临界温度
firing pin───[军]撞针；撞针; 击针
firing order───射击[点火]次序（指内燃机气缸）；[动力]点火次序（指内燃机气缸）；射击次序
temperature outside───室外温度
temperature rise───[电]温升；温度上升；温度上升，温升，升温
The high temperature foamed ceramic produced has low firing temperature, short duration of firing, wide range of firing temperature and easily control production.───铅硼硅系统，研制出具有低烧成温度、低热膨胀系数的色釉，用作粘土釉面瓦釉料，其外观、物理、化学性能均能满足质量要求。
glaze of low firing temperature and low expansion coefficient, to match the glaze tile made from common clay, was prepared in lead borosilicate system.───铅硼硅熔决釉研制出同时符合普通粘土瓦坯的烧成温度低、热膨胀系数低这两个主要性能特点的釉料。
The factors which affect the firing temperature of the glaze were discussed, and the opacifying mechanism of glaze was also approached.───探讨了影响釉烧成温度的诸因素及釉的乳浊机理。
MLC inner Electrode. Suitable for ceramic with high firing temperature.───多层瓷介电容器用内电极浆料，适用于高烧产品
MLC inner Electrode. Suitable for ceramic with middle or low firing temperature.───多层瓷介电容器用内电极浆料，适用于较低烧温的产品
MLCC MLC inner Electrode. Suitable for ceramic with low firing temperature.───多层瓷介电容器用内电极浆料，适用于低温
MLC inner Electrode. Suitable for ceramic with low firing temperature.───多层瓷介电容器用内电极浆料，适用于低烧产品
Siliceous zinc is blue firing temperature is highest it is 1280 degrees.───硅酸锌蓝的烧成温度则最高为1280度。
The main factors for preparation were studied, including the proportion of raw materials, firing temperature and time, reducing atmosphere, flux and so on.
Kyanite calcined at two temperatures is used as raw material to prepare calcined kyanite. Their firing temperature, high temperature properties, thermal shock and microstructure have been studied.
The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.
It is analyzed that Mossbauer parameter variations of clays from the famous sites of ancient kilns change with firing temperature, firing time and firing atmosphere in firing process.
As substitution of diopside for talc, the body has lower firing temperature and widening sintering range. The property of diopside porcelain is in keeping with standard of high frequence dielectric.
When spodumene was added in the products, the cause for reducing firing temperature, enhancing mechanical strength and heat-shock resistance, possessing good chemical stability was clarified.
In this paper, the varying laws of the properties of cordierite-containing honeycombedceramic were studied when firing temperature and hold time were changed.
The microstructure of corundum-mullite duplex can be controlled by adjusting microsilica, alumina and firing temperature, which can improve hot strength of corundum-mullite duplex ceramic.
This article introduces the development of color sol-gel coating glass, and details the fomulation and stability of sol-gel solution as well as immersed glass' raised velocity and firing temperature.