filling rate发音

意思翻译

填充率

相似词语短语

filling───n.(Filling)人名；(瑞典)菲林；n.填充；填料；v.填满；遍及（fill的ing形式）

filling machine───灌装机；[食品]充填机；锉锯机；装料机; 灌注机器; 充填机械; 加料机

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；价格；等级；vi.责骂；被评价；vt.认为；估价；责骂

filling stations───汽车加油站（等于gasstation）

filling into───填充

filling up───填补；装满；堵塞；[机] 埋乞法; 装满

dental filling───补牙

filling date───交发日期；申请日；交发日期，填写日期

fuel filling───加油；加注燃油；填充燃料

双语使用场景

Photosynthetic matter transportation ratio and filling rate were higher.───光合物质转运率高，灌浆速度快。

Filling accuracy: The filling rate shall be reduced for product with requirement for high accuracy.───灌装量的精度，精度要求高的，则灌装速度应该调慢。

On the basis of predecessors study, a new method for calculating free-filling rate was proposed.───在前人研究基础上，提出了一种新的自由充填速率计算方法。

Correlation analysis suggested the grain filling rate was the main factor affecting maize yield.───相关分析表明，群体籽粒灌浆速率是影响产量的主要因素。

Decrease of grain filling rate, not decrease of grain filling duration was the major reason for declined grain weight at shading treatments.───弱光处理后籽粒粒重的降低主要是平均灌浆速率显著降低所致，而灌浆持续期长短对其影响较小。

These results show that the main causes of poor grain filling are later filling initiation and lower filling rate of inferior grains.───由此说明，部分亚杂组合籽粒充实不良的主要原因是弱势粒灌浆启动期滞后与灌浆速率小。

The discrepancy of grain weight among the same cultivar might result from the difference of grain filling rate.───同一品种的粒重差异来源于灌浆速率的不同。

Both the filling quantity and filling rate can be arbitrarily adjusted with high accuracy.───灌装量和灌装速度均可任意调节，精度高；

Two 9-millimeter channels transfer water from the lower reservoir at a filling rate of five to seven seconds when the pack is squeezed.───两个9毫米渠道转移水从下水库在充盈率五至七秒时，包挤压。

英语使用场景

But it was easier to overfill in CPP , while in ZOE, the deficient - filling rate is higher.

Filling duration, occurrence time of maximal filling rate, duration of slight-increase period, and slight-increase period filling rate were less affected by weak light and high temperature.

In the wake of the diminution of helical lead angle the influencing extent of the variation of materials filling rate inside the screw conveyer on the screw shaft deflection was reduced.

The results showed that starting from 14 days after anthesis, root senescence of winter wheat was accelerated, corresponding with the peak stage of grain filling rate.

The results obtained show the consumptions of shaft power and electric power are directly proportional to mill speed and filling rates, and running torque bears relation only to filling rate.