female die信息详情
下半模；阴模
female───n.女人；[动]雌性动物；adj.女性的；雌性的
die die die───死吧，死吧
die die───模具
female threading───[机]阴螺纹；[机]母螺纹
female horse───雌马
archetypical female───典型女性
canonized female───圣女
female counterpart───女性对应者
female coach───女教练
A middle-aged men rushed into the house, then side 2 older one male one female die.───一个中年男性冲进房屋，接着身边2个年龄大的一个男一女死掉。
If the day after due to the stiffness of the material required to change the material thickness, may lead to male into female die.───如果日后由于材料刚度的需要要求改变材料厚度，可能导致要将阳模转换为阴模。
The female die was designed movable but the male die was fixed.───该模具将凹模设计成活动式，凸模固定。
The main deformation areas of the rectangular box in deep drawing were flanges and the circle-corners of female die in the corners.───盒形件拉深主要变形区集中在盒形件角部的法兰和凹模圆角部位。
Intraform is used extensively in manufacturing bolt trim female die due to its high quality and high efficiency.───Intraform技术因其成形质量好、效率高，在螺栓切边凹模的制造中得到了广泛的应用。
Because of the mutual friction between the bend blank and the female die, the bend parts can emerge during shaping of the parts.───弯曲件成形时弯曲毛坯和凹模之间的相对摩擦是表面擦伤原因。
Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.───冷镦圆头凹模是冷镦螺栓生产过程中的关键模具。
For the given workpiece, we make the optimum design of extrusion female die.───针对给定的工件，进行挤压凹模的优化设计。
To make the edge of the male die and female die produce the shearing cranny to separate the sheet matal .───是由凸、凹模刃口之间产生剪裂缝的形式实现板料分离。
The results show that the main reasons of early failure of the female die are the unsteady and the stress concentration, which are caused by the unreasonable die structure and blank form.
Cold upset female die of fillister head is the key mold in the manufacturing process of heading bolt.
It mainly includes a hydraulic pressure main engine, a stripping power supply, a male die, two female die composite units together with a lining board and a parison push-out mechanism.