feed metal信息详情
原料金属
feed───v.喂养;进食;为……提供充足的食物;施肥;给(火)添加燃料;为(机器)提供原料或动力;为(某人)提供(信息、主意等);为(水体)供水;(球类运动用语)喂(球),传球给(队友);使(缓慢平稳地)移动;使穿过(有限的空间);增进;放牧;抚养(家庭等);(非正式)满足(毒瘾);n.饲料;饲养;(尤指给动物或婴儿)喂食;进食;(动物或婴儿的)一餐;(机器的)进料装置;(机器、设备的)原料供给;(卫星或网络)转播;(计算机的)订阅源
feed stock feed───饲料饲料
feed like───喂得像
metal───vt.以金属覆盖;n.(Metal)(捷、瑞典)梅塔尔(人名);n.金属;合金;adj.金属制的
parasitically feed───寄生性饲料
feed him───喂他
feed to───向…提供食物;供应给
feed at───馈送
daphnia feed───水蚤饲料
The purpose of this is to feed the molten metal to the mold cavity as the molten metal solidifies and shrinks, and thereby prevents voids in the main casting.───其目的是当熔化金属凝固和收缩时往型腔里补充熔化金属,从而防止在主铸件中产生孔隙。
Japan buys much of its rare metal from China to feed its electronics and car industries.───日本从中国购买稀有的金属向国内电子工业和汽车工业提供生产原料。
conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.───金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。
The feed metal must be located above the highest point of the point of the casting.───饲料中的金属必须设以上的最高点,该点的铸件。
A recycler with three holes as inlets can be used to feed metal, paper, plastic and grass and an inlet for garbage.───回收再利用设备设有三个洞状入口,可用于装填金属,纸张,塑胶和玻璃,另外还设有一个垃圾进口。
Gun is bleeder type, for use only with a pressure feed metal cup directly attached to it using and air pressure NOT OVER 40 PSI.
- feed mixing
- feed mixer
- feed mincer
- feed mixing machine
- feed me with your kiss
- feed motor
- feed movement
- feed me up
- feed network
- feed mechanism
- feed nip roller
- feed nozzle
- feed oat
- feed on illusions
- feed on live on
- feed on small animals
- feed on each other
- feed on small fish
- feed on the ground
- feed oneself
- feed on something