extrusion ratio发音

意思翻译

[机]挤压比

相似词语短语

extrusion online───挤出联机

joggled extrusion───点动挤压

extrusion companies───挤压公司

ratio───n.比率，比例

variation ratio───异众比率；变异比率；变速比，变速范围

extrusion thermoforming───挤压热成型

extrusion gis───挤压地理信息系统

extrusion reflex───挤压反射

click ratio───点击率

双语使用场景

So fine aluminum conductor wire can be produced by the proposed process and under proper extrusion ratio.───合理的挤压比，可直接生产性能良好的铝合金导电线材。

With the increasing of extrusion ratio, both tensile strength and extensibility are improved.───随着挤压比的增加，抗拉强度和伸长率提高。

Increasing of extrusion ratio was beneficial to the improvement of mechanical properties of composites.───提高挤压比，有利于复合材料性能的提高。

As observed before, since the wheel velocity does not affect the defect occurrence, the limiting extrusion ratio is not affected by it.───正如之前观察得知，由于转轮速度并不影响缺陷发生，所以限制挤压比也不会受到影响。

the relationship curves between the extrusion speeds and extrusion force for different extrusion ratio are obtained.───分析了挤压力随挤压速度及挤压比的变化规律。

So fine aluminum conductor wire can be produced by the proposed process and under proper extrusion ratio.───采用合理的挤压比，可直接生产性能良好的铝合金导电线材。

The corrosion rate and degree is decreased with increased extrusion ratio and decreased chips size.───随着挤压比的增大，屑粒尺寸的减小，腐蚀程度减轻，腐蚀速率呈递减趋势。

Fig. 9 illustrates the limitations of the extrusion ratio with respect to the other four process parameters.───表9说明了在其他四个加工参数下的挤压比的限制性。

The hot extrusion of magnesium alloy sheet under high extrusion ratio is investigated.───探讨高挤制比之镁合金板材热间挤制加工。

英语使用场景

The author proposes a local extrusion ratio method to determine the location of extrusion die hole.

The stress and temperature effect increase with increasing extrusion ratio and ram speed.