exhaust tube信息详情
排气管;抽气管
exhaust───n.废气;排气管;v.使精疲力尽;耗尽;彻底探讨;排出(气体)
exhaust fan───n.排气风扇,抽风机;n.[建]排气扇;[建]抽风机;排风机
exhaust stroke───[机]排气冲程;[机]排气行程;排气冲程,排气行程
valved exhaust───带阀排气
ansa exhaust───安莎排气管
carven exhaust───切割排气
exhaust air───排气,废气;[环境]废气;排气
tube───n.管;电子管;隧道;电视机;vi.乘地铁;不及格;vt.使成管状;把…装管;用管输送
exhaust pipe───排气管
bundle in the exhaust fan side , this structure is very convenient maintenance, and fan motor is always in the cold air environment, ensure a longe life of motor.───管束位于风机的排风侧、这种结构非常方便维护,并且风机电机始终处于较冷的空气环境中,电机寿命长。
reasons of low percentage elongation of mid Si Mo vermicular graphite cast iron exhaust tube casting in trial production were analyzed.───试生产的中硅钼合金蠕墨铸铁排气管铸件本体伸长率不足的原因进行了显微组织分析。
Check for signs of leakage or cracked surfaces at both ends of tube, exhaust manifold and EGR valve.───检查两个管的末端,排气歧管和EGR阀是否有泄露或表面有裂痕。
NOTE: When one end of a vacuum is sucking, the other end is blowing air out of an exhaust tube.───附:当吸尘器的一端正在吸尘,它的另一端正在从一根排气管向外排气。
and an exhaust tube is connected with a tail gas treatment reactor.───将排气管接入到尾气处理反应器。
at the edge of the exhaust tube vacuum worse.───排气台边端集热管真空度差。
Reason Analysis on Low Percentage Elongation of Mid-Si-Mo VG Cast Iron Exhaust Tube Casting from Microstructure───从微观组织看中硅钼蠕铁排气管伸长率低的原因
Application of Factor Design Method to Studying on Mid-Si-Mo VG Cast Iron for Exhaust Tube Casting───因子设计法在中硅钼蠕铁排气管材质研究中的应用
Gas-flow fluctuation velocity within exhaust tube of pulse-jet engine───脉冲发动机喷管内气流压力波动速度研究
The process of applying factor design method to studying on mid-Si-Mo vermicular graphite cast iron for exhaust tube casting is introduced in the paper.
- exhaust unit
- exhaust tower
- exhaust trunk
- exhaust valve
- exhaust trail
- exhaust velocity
- exhaust vane
- exhaust vent
- exhaust vant
- exhaust wetness
- exhaust volute
- exhaust whistle
- exhaust-collector ring
- exhaust volume
- exhaust-deflection duct
- exhaust-gas heating
- exhaust-gas boiler
- exhaust-heat boiler
- exhaust-heated air
- exhaust-gas mixture
- exhausted area