error compensation发音

意思翻译

[计]误差补偿，平差

相似词语短语

compensation───n.补偿；报酬；赔偿金

compensation definition───薪酬定义

compensation plan───酬金方案

compensation survey───薪酬调查

over compensation───过补偿（指摆轮游丝系统在温度升高时走快的现象）

compensation claims───要求索赔，赔偿要求

compensation scheme───赔偿计划

executive compensation───管理层薪资水平；管理人员补贴金; 经理人员报酬

compensation review───薪酬审核

双语使用场景

new error compensation method is introduced.───改进了误差补偿方法。

Then, through the model, we can finish easily the accelerometer's temperature error compensation on the software design.───然后，利用所得到的静态温度模型对该加速度计进行温度误差软件补偿。

Autofocus generally encompasses two distinct steps, i. e. phase error estimation and phase error compensation.───自聚焦主要由两个重要步骤组成，即相位误差估计和相位误差校正。

The paper introduced a method of error compensation, established mathematics models and found a solution to it.───介绍了气磁混合轴系的一种误差补偿方法，建立了轴系的数学模型并求解。

Therefore, thermal error compensation is one of the key technologies to ensure the accuracy of precision machining.───热误差补偿是保证精密机床加工精度的关键技术之一。

The result shows that this method is remarkably effective for error compensation.───结果表明，用该方法进行误差补偿效果显著。

Error compensation is an effective approach to enhance dynamic measurement precision and error model is the key factor for the compensation.───误差修正是提高动态测量精度的有效途径，其中误差的建模是关键。

finally, thermal error compensation system will be obtained and proved to be right through practical manufacturing process.───最后给出热误差补偿系统，并通过实际生产使用情况论证方法的正确性。

Error modeling and sensitivity analysis provides theoretical foundation for optimum design and error compensation of the robotic mechanism.───位姿误差建模及灵敏度分析为该复合机构的优化设计和误差补偿提供了理论基础。

英语使用场景

The error compensation and fault-tolerant technique has become the important measures to improve them.

In chapter 5, real time thermal error compensation on a CNC turning center is introduced, which is a production project under the sponsorship of General Motors Windsor Transmission Plant.

It is used in the error compensation of a 3 - axis CNC manufacturing center.

A real-time error compensation controller was developed based on the CNC shift function of external coordinate system.

A hobbing error compensation method is proposed according to the factors of forming the hobbing error.

The function of the system automatic measurement, error calculation, measuring result display and error compensation etc.

An error compensation control method which can improve contour tracing accuracy of aspherical surface ultraprecise machine is introduced.

Methods of error compensation for azimuth holding system in an INS ( inertial navigation system ) are presented.

The realization method of lined error compensation hardware system and the methods of advance its compensation ability by the reasonable selection swatch and by the system study were introduced.