engineering practice发音

意思翻译

工程实践

相似词语短语

control engineering practice───控制工程实习

practice───n.实践；练习；惯例；vt.练习；实习；实行；vi.练习；实习；实行

established practice───成规，惯例; 规矩；惯例；成规

verus engineering───维鲁斯工程公司

engineering works───工程建筑物；机器制造厂

software engineering───[计]软件工程

mining engineering───[矿业]采矿工程

reverse engineering───[计]逆向工程

architectural engineering───建筑工程

双语使用场景

Modeling facilitates not only proper engineering practice, but also effective communication.───建模不仅仅推动了正确的工程实践，而且还促进了工程团队的有效交流。

Good software engineering practice calls for systems to be loosely-coupled wherever possible.───良好的软件工程实践要求在所有可能的地方使用松耦合的系统。

Patterns are an important part of today's software engineering practice.───在今天的软件工程实践中，模式是相当重要的一部分。

These formulae, with simple form and good accuracy, are easy to be applied in engineering practice.───该组公式与数值计算结果对比，精度良好，形式简单，便于工程应用。

The following combination of engineering practice I found in prominent, easy to overlook a few issues to be analyzed.───下面结合本人在工程实践中发现的比较突出、容易忽视的几个问题来加以分析。

Engineering practice shows that this program system is of better utility and economic value.───工程实践表明，该机算系统具有较好的实用性和经济价值。

Reactive Powder concrete technology have not been used widely in engineering practice indeed yet.───活性粉末混凝土技术仍未真正广泛地应用于工程实践。程实践。

Mechanical base experiment teaching is one of the important parts of engineering practice system.───机械基础实验教学是工程实践体系的重要组成部分。

The results show that this method is feasible and can be used in engineering practice.───通过对反分析结果进行检验与评价，证明其结果符合实际工程要求。

英语使用场景

And electromechanical model was simulated bying the engineering practice. During the experiment, muzzle velocity of the projectile and charging voltage were gained.

New awards in engineering practice are being developed to provide clear progression routes from the relevant national awards in engineering practice.

Engineering practice shows that it is a close relationship between them, and before the failure of a slope there is always a big vertical settlement and lateral deformation.

According to the engineering practice, the arithmetic of edge check can decrease the supposititious edge pairs and image noise, and has high precision and practicality.

It gives a reference to engineering practice. The method was applicable for the structural member which is not bonded on bottom for obstructions underneath.

In the engineering practice, one of them can be chosen to suit the specific field case.

According to the engineering practice, a new design method of pre-stressed system for the pier is brought forward, which is more practical to engineering project than tieback coefficient method.

Based on the engineering practice analysis is made on the performance, advantages and disadvantages of this new-type construction water tube "PP-R", and provided the solutions as well.

The engineering practice and the numerical simulation the millisecond blasting for ditching deep bore hole.