electroslag welding发音

意思翻译

[机]电渣焊

相似词语短语

welding───v.焊接；（使）紧密结合，成整体；焊接（物件）；（通过熔化或软化）连接（weld的现在分词）；n.焊接，锻接

mig welding───金属惰性气体电弧焊

bevelling welding───坡口焊

welding nut───焊接螺母；[机]焊装螺孔塞

welding electrode───焊条；电焊条；[机]焊接电极；焊接电极，焊条，电焊条

welding machine───电焊机，焊接机；焊机；焊接机

autogenous welding───氧炔焊；自熔焊接；[机]气焊

arc welding───电弧焊，[机]弧焊；电弧焊接

electric welding───[机]电焊

双语使用场景

procedure using anneal instead of normalizing will improve the productive efficiency of electroslag welding joint.───用退火代替正火后的电渣焊工艺可大大提高生产效率。

mm area of re-bar end surface, it should be free of rust, oil dirt, concrete slurry etc. The contaminated re-bar should be cleaned for electroslag welding.───钢筋端部200 mm范围不应有锈蚀、油污、混凝土浆等污染，受污染的钢筋应清理干净后才能进行电渣压力焊焊接。

re-bar end used for electroslag welding should be straight, flat and clean free of U-shaped, bruising, concave and convex, bending or distorted deformations.───电渣压力焊焊接使用的钢筋端头应平直、干净，不得有马蹄形、压扁、凸凹不平、弯曲扭曲等严重变形。

Specification for Consumables Used for Electroslag Welding of Carbon and High-Strength Low-Alloy Steels───碳和高强度低合金钢的电渣焊用自耗品规范

Recommended practice for consumable nozzle electroslag welding───自耗喷嘴式电渣焊接作业标准

The critical construction measures of ensuring the quality of steel bar electroslag welding───保证钢筋电渣压力焊质量的关键施工措施

Analysis on technical characteristic of steel bar welding by using electroslag welding machine───电渣压力焊钢筋连接工艺的技术性能分析

electroslag welding with plate electrode───板极电渣焊

electroslag welding with tube electrode───管极电渣焊

英语使用场景

According to the specification of equipment, the hardware and PLC application software have been designed. This control system has been used in double wires electroslag welding.

The oscillating control of welding wire for electroslag welding have been realized by PLC.

In this paper, it introduces the process application and study of tubes coating for electroslag welding and production for Box-Beam(pillar)s tendon are introduced.

The procedure using anneal instead of normalizing will improve the productive efficiency of electroslag welding joint.

Impact properties of BHW35 electroslag welding metal prepared using acidic and basic flux have been investigated and the transition temperature FATT50 has been obtained in this paper.