dynamic recrystallization信息详情
动态重结晶
动态再结晶
recrystallization───n.再结晶
dynamic pricing───动态定价
dynamic poses───动态姿势
dynamic abt───动态abt
dynamic stretches───动态拉伸
group dynamic───群体动力
dynamic braking───[机]动态制动；[机]动力制动；动力制动，动态制动
dynamic forces───[物]动力
governing dynamic───治理动态
The softening mechanism is dynamic recrystallization.───软化的主要机制为动态再结晶；
dynamic recrystallization of ferrite will occur at high strain.───较高时，将会发生铁素体的动态回复和再结晶。
The dynamic recrystallization grain size has power law relation with Z parameter.───结晶晶粒尺寸和Z参数呈幂律关系。
Dynamic recrystallization takes place in the dynamically recrystallized zone and fine grains are achieved.───动态再结晶区组织发生再结晶，生成细小的等轴晶粒；
The grain size decreases and the rate of dynamic recrystallization increases with increasing passes of reciprocating extrusion.───随着往复挤压道次的增加，动态再结晶速度加快，晶粒尺寸迅速减小；
The deformation mechanism of this region was dynamic recrystallization and this region was suitable for thermo mechanical processing.───这个区域对应的变形机制为动态再结晶，适合进行热加工。
The relationship between the size of dynamic recrystallization grain and Z-parameter is established.───建立起热变形条件即Z参数与动态再结晶晶粒尺寸的关系。
The dynamic recrystallization grain size of cast rolling sheet is less than that of normal rolling sheet.───不同变形条件下铸轧板的晶粒尺寸均小于常规轧制板的；
Deformation temperature and the deformation velocity will affect critical deformation, and thereby affect the dynamic recrystallization.───变形温度，变形速度等因素都会影响临界变形量，从而影响动态再结晶。
In addition, dynamically recrystallized grain size of friction stirred 5052 alloy is a key, significant microstructural refinement caused by the phenomenon of dynamic recrystallization.
Only deformation is higher the critical deformation can the dynamic recrystallization be occurred.
During hot-working process, dynamic recovery and dynamic recrystallization occur in the microstructure.
The variation of volume fractions for static and dynamic recrystallization, and austenite grain size during rolling process are obtained by model calculation.
The dynamic recrystallization grain size has power law relation with Z parameter.
Furthermore, both the effect of martensite lath boundaries on the nucleation of dynamic recrystallization, and the mechanism of nucleation and growth of equiaxial nanometer grains were revealed.
Lowering temperature window of rolling and large strain accumulation is basic condition for exceeding of critical strain for dynamic recrystallization to refine austenite grain size.