drive shafts发音

意思翻译

（汽车）驱动轴，主动轴（driveshaft的复数）

相似词语短语

shafts───v.装杆；发出；欺骗；用篙撑船（shaft的三单形式）；n.[机]轴，杆；[矿业]竖井（shaft的复数）

shafts def───轴def

shafts mfg───轴制造商

cardan shafts───[机]万向轴；通天轴；推进轴；万向节传动轴

shafts gif───轴gif

shafts hof───轴hof

shafts golf───杆高尔夫

drive───n.驱车旅行，驾车路程；传动装置；驱动器；（人的）强烈欲望；魄力，内驱力；（有组织的）活动；快车道；猛抽；（对牲口的）驱赶；猛击，大规模攻击；玩纸牌的聚会；v.开车；（机动车）被驾驶；拥有……汽车；开车送某人；推动；钉；开凿；驱赶；迫使，逼迫；激励；挖掘；猛击（球）；吹，刮；猛落；围赶（猎物）；使（抽象事物）发生或发展

drive drive the car───开车开车

双语使用场景

XRAY has just presented its new ECS drive shafts, designed with high-level racing in mind.───X射线刚刚提出了新的精英传动轴，设计的高级别比赛中铭记。

drive shafts are usually hollow in order to weigh less, but of a large diameter so that they are strong .───传动轴通常是空心的以减轻重量，但直径比较大使它有足够的强度 。

Now she has an annual output of 150 thousands transmission shaft assemblies, 20 thousands large and medium-sized tractor drive shafts.───现己形成年产传动轴总成150000根，大中型拖拉机驱动轴20000根。

One-piece , two -piece , and three -piece drive shafts are used, depending on the length of the drive line.───连衣裙、上下两件、和三件一套的驱动轴被用，仰赖驾驶线的长度。

Drive shafts from top to bottom are operated by low-speed shafts of cylinder gear reducer, therefore cut from top to bottom is synchronized.───圆柱型齿轮减速机低速轴分别带动上下曲轴，所以上下剪切是同步进行的。

It's integrated into the sump to give the drive shafts the most direct access to the wheels and to keep the engine sitting low.───它融入了油底壳使传动轴的最直接的接触轮毂，并随时向坐在发动机低。

DRIVE SHAFTS Advised maintenance after 1200 hours.───建议每1200小时保养一次。

Remove covers of drive shafts.───拆除驱动轴外盖。

We want to buy Drive Shafts, Steering Racks, Brake Calipers, Power Steering Pumps, Automotive Parts, Components and Spares.───我们要采购传动轴，转向衣架，制动器卡钳，动力转向泵，汽车零件，部件和零件。

英语使用场景

The dual - clutch gearbox contains two wet clutches with two drive shafts.

Drive shafts are constructed of high-strength steel tubing to provide maximum strength with minimum weight.

By processing and analysis of test data, influence degree of different factors is obtained, and the optimum formulation of high-duty hypoid gear lubricant of automotive drive shafts is obtained too.

For a typical rolling mill, the work rolls are driven by universal joint drive shafts.

Drive Shafts , Steering Racks , Brake Calipers, Power Steering Pumps, Automotive Parts, Components and Spares.

One-piece , two -piece , and three -piece drive shafts are used, depending on the length of the drive line.