drilling tool发音

意思翻译

钻孔工具；镗孔刀具

相似词语短语

drilling───n.钻孔；训练，教练；演练；v.钻孔；训练（drill的ing形式）

tool───vi.使用工具；用机床装备工厂；n.工具，用具；器械，机床；手段；vt.用工具给……加工

drilling down───向地下钻；深度探讨

crowner drilling───冠钻

drilling operation───钻井作业

drilling hole───钻孔

drilling jobs───钻井作业

choral drilling───齐声练习

ocean drilling───海洋钻探

双语使用场景

of extracting drilling tool wears character signal is studied.───研究了钻削过程中刀具磨损特征信号的提取。

Mechanical design of stabilized platform unit is one of the key techniques in the rotary steering drilling tool.───稳定平台单元机械系统的设计是旋转导向钻井工具的关键和难点之一。

Right at twenty past two Mr. Harrison ordered a drilling tool-pusher to start examining the blowout preventer.───正好在两点二十分哈理森先生命令钻井技师检查防喷器。

A drilling tool that uses polycrystalline diamond compact (PDC) cutters to shear rock with a continuous scraping motion.───一种钻井工具，利用聚晶金刚石复合片切削齿通过连续的刮擦运动去剪切岩石。

Water-saving drilling tool is mainly made of 'pulsator on water outlet valve of mud pump' and 'in-hole diving pump drilling tool'.───前言：节水钻探器具主要由“加在地表泥浆泵出水阀上的脉动器”和“孔内潜水泵钻具”两部分组成。

By means of the survey at Anpeng and Zhaowa Blocks, the main modes and the causes of drilling tool failure in earlier period are found out.───通过对安棚、赵凹区块钻具早期先期失效现状调查，得出了钻具早期失效的主要模式及产生原因。

Moreover, the removal of the coiled chips from the drilling tool previously necessary after each drilling cycle is dispensed with.───而且，省却了以前在钻孔之后必须从钻孔工具中移走切屑螺旋的需要。

In the most dangerous place, the security of drilling tool "s strength should be concerned especially. "───在应力最危险部位，应特别注意钻具的强度安全问题。

The structure of inner cool drilling tool, the composition of the cutting oils, performance and manufacturers were introduced.───同时还简要介绍了内冷却刀具的结构和适宜孔加工用国产切削液的成份、性能及制造厂家。

英语使用场景

In order to prevent drill fluid splash during drilling tool connection, condensed air is injected into standpipe to drive drilling fluid down.

Develop liquid select branch water for use , fetch heart technology adopt and do and get into and fetch the heart law , it is in charge of the drilling tool only to cooperate.

CASTON has experts from Xuanhua machinery plant with superiority down - the - hole drilling tool and anchorage drill pipe.

Rotary percussion drilling tool may solve the problem of low rate of penetration and short service life of drilling bit in hard-brash formations.

Mechanical design of stabilized platform unit is one of the key techniques in the rotary steering drilling tool .

The problem of extracting drilling tool wears character signal is studied.

Short Drill Pipe Short drill rod is a tool for adjusting drilling tool spaced length to reach a certain technical purpose in drilling engineering.

Cataclasite series; Rate of core recovery; Single Rotary and Double Tube Core Barrel, ; Structure of drilling tool; Drilling technology.

The working principle of the controllable eccentralizer rotary steerable drilling tool is presented.